Black HDPE plastic 1/4''
- Weather and impact resistant
- Create silhouettes of tools for easy tool identification
- High density polyethylene (HDPE) will maintain holding capacity
- Take advantage of our cutting service.
D-HDPEB-481/4
- This HDPE is a textured rigid material, the high density of this product makes it shatterproof.
Typically cut using a table saw or a portable saw.
- Use it to make light-weight surfaces and shelving
- Ideal for side panels and shadow board displays
-We also offer an HDPE pegboard for your tool organization.
Should you need something thinner, consider the D-ALUW-481/8
SIMILAR PRODUCTS
- Available in white: D-HDPEW-481/4
- Available in 1/2" thick: D-HDPEB-481/2
TAKE ADVANTAGE
Have your HDPE surface cut and shipped in 24 hours with our decking cut service, starting at $5!
EASY TO INSTALL
- HDPE can be installed by securing it from the top, through the pipe with a decking screw,.
- Check out the INSTALLATION STEPS to learn how.
CUTTING SERVICE
Take advantage of our surface cutting service. Learn more about the Flexpipe parts cutting service!
Contact your regional sales manager for volume pricing.
Length | 96 in (2438.4 mm) |
---|---|
Height | 1/4 in ( 6.35 mm) |
Width | 48 in (1219.2 mm) |
Weight | 40 lb (18.182 kg) |
Common Usage | Silhouettes of tools for easy tool identification |
Primary Material | High Density Polyethylene |
Electric Conductivity (ESD) | No |
When installing 1/4" HDPE there a ways to install:
1. From the top
- Put the AO-SHIM on the pipe (one every 12 inches for HDPE 1/4)
- Put the surface on the pipe and lock it into place
- Starting from a corner pierce 1/8 hole trough surface and AO-SHIM every 2 AO-SHIM
- Countersink the holes
- Screw the screw through the surface and the AO-SHIM until the head is flat with the decking
You need to enter info before adding a new review.
Need more informations ?
Here's everything you need to know!