Pipe clamp double mount
- Secures surfaces to pipe
- Quick installation
- 200 units per box (please order individually)
The AO-EMT2 is a double mount metal clamp.
Designed to secure the middle of surfaces to our pipe and joint structures. Unlike store-bought clamps, ours are made to fit our 28 mm pipes perfectly. We recommend that you use the AO-EMT1 for all other applications on the borders of a surface.
We recommend the use of AO-EMT2 when using large surfaces. The clamp will reinforce the surface by adding contact points that will keep it from moving.
Aesthetically pleasing the clamp is installed on the underside of surfaces, ultimately creating a better look.
Another option is to use them to guide cables/wires.
Compatible with EP-96-ST and EP-96-BK
See the installation steps tab to view how to install the AO-EMT2
Want to reuse parts of your old system?
The AO-EMT2 is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and non-compatible with our parts.
Since the AO-EMT2 allows you to secure pipes without drilling in them, you can then quickly disassemble and reuse the same pipes for other projects.
All AO-EMT2 are sold individually.
To make it easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system considers a single amount only. Please enter the total amount of clamps you wish to receive (example; 200 units = 1 box).
This product will be discontinued once stock runs out, we suggest AO-EMT1
|Units per box (sold separately)||200|
|Height inches||1 1/8 in (29mm)|
|Width inches||3 1/16 in (78mm)|
|Depth inches||13/16 in (21mm)|
|Unit weight pounds||0.057 lbs (0.026 kg)|
|Box dimensions inches||11 X 9 X 5 in (279mm X 229mm X 127mm)|
|Compatible pipe systems||Flexpipe, Creform, Fastube|
|Noncompatible pipe systems||Trilogiq|
|Electric conductivity (ESD)||Yes|
|Material||Hot rolled steel (SPHC)|
|Steel hardness (HRB)||0.65|
|System operational temperature||-58°F à 185°F (-50°C à 85°C)|
|Manufacturing technique||Folded and welded|
- Ensure you have the following parts:
- 1x AO-EMT2
- 2x F-S81/2
- 1x 28mm pipe of your choice
- 1x Surface of your choice
- 1x Drill w/ #2 square head
- Press-fit AO-EMT2 unto P1 pipe in the desired position.
- Fix the AO-EMT2 to the surface S1 with two F-S81/2 screws.
Need more informations ?
Here's everything you need to know!