Please select a shopping list

Flat clamp joint set

Flat clamp joint set steel cr

In stock

  • Compatible with 28 mm pipes
  • Nuts and bolts are included, but packaged separately
  • Assembly required
  • Joint set with antistatic properties (ESD)

The HJ-15NP is a chrome-plated joint set with antistatic properties (ESD) that connects a tube to a surface. If you want to create both an anchor and support, this joint set is your best option.

To assemble an HJ-15NP you need to put an H-15NP together with an H-16NP, an M6-12BWZ bolt, and an M6-NWZ nut.

Assembly tip:
You can also create the same type of support with the following accessories: AO-SHIM and AO-EMT1. The first serve for leveling, while the second serves for fixing the pipe to the surface. Although this option is an alternative, we recommend that you considerate the HJ-15NP as a first choice.

Technical Information:
This joint set is designed with 4 striations for a better grip on the plastic coating of the 28 mm pipes. It also includes an additional pre-drilled reinforcement hole to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.

Installation Steps:
See the installation steps tab to view how to assemble this connector.

Non-Electric Conductivity Version:
A version of this joint set is offered without antistatic properties: HJ-15

Want to reuse parts of your old system?
The HJ-15NP Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

Please note that nuts and bolts are included, but packaged separately. Assembly is required.

More Information
Frequency of UseModerate
Electric Conductivity (ESD)Yes
Manufacturing TechniqueStamping and deburring
  1. Ensure you have the following parts:
  2. Group the H-15NP with the H-16NP connector around the first pipe. Ensure the connectors fit properly to the pipe.
  3. Fix the connectors together by placing the M6-12BWZ with the M6-NWZ in the corresponding openings.
  4. Tighten completely until the HJ-15NP joint set is firmly attached to the pipe.
  5. Fix the HJ-15NP joint set on the surface of your choice with an F-SF81 or any appropriate screw for the desired surface.

You need to enter info before adding a new review.

Write Your Own Review
You're reviewing:Flat clamp joint set