Lower clamp joint
- Connector used to assemble the HJ-15NP joint set
- Compatible with 28 mm pipes
- 300 units per box (please order individually)
- Electric conductivity (ESD) joint
The H-16NP is a chrome plated single joint with antistatic properties (ESD) used to assemble the HJ-15NP joint set. This piece can be used to connect a pipe with a surface.
This connector is designed with 2 striations for a better on the plastic coating of the 28 mm pipes.
Make sure to choose the proper hardware to use with this part, since it is not used with the regular M6-25B bolt. The H-16NP must be used with an H-15NP upper clamp joint, an M6-12BWZ bolt and an M6-NWZ nut.
Non-Electric Conductivity Version:
A black version of this item if offered without antistatic properties: H-16
Want to reuse parts of your old system?
The H-16NP Flexpipe joint is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
All our joints are sold individually.
To make is easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system consider single amount only. Please enter the total amount of joint you wish to receive (example; 300 units = 1 box).
|Units per box (sold separately)||300 units per box|
|Length inches||2 5/8 in (67 mm)|
|Height inches||3/4 in (19 mm)|
|Width inches||1 5/16 in (33 mm)|
|Depth inches||1 5/16 in (33mm)|
|Steel thickness inches||1/8 in (2.5mm)|
|Unit weight pounds||0.101 lbs (0.046 kg)|
|Box dimensions inches||11 X 9 X 5 in (280mm X 225mm X 130mm)|
|Compatible joint systems||Creform, NIS, C Tek Lean Solutions, Trilogiq (28 mm)|
|Noncompatible joint systems||Fastube, Trilogiq (28.6 mm)|
|Noncompatible joint systems||Trilogiq, Fastube|
|Compatible pipe systems||Creform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm)|
|Noncompatible pipe systems||Trilogiq (28.6 mm)|
|Frequency of use||Moderate|
|Electric conductivity (ESD)||Yes|
|Material||Hot rolled steel (SPHC)|
|Steel hardness (HRB)||68-75 HRB|
|System operational temperature||-148°F to 572°F (-100°C to 300°C)|
|Steel treatment||Chrome plating|
|Manufacturing technique||Stamping and deburring|
|Striations for grip||2 striation grip lines|
|Additional reinforcement hole||None|
Need more informations ?
Here's everything you need to know!