English CA 
Français CA 
English US 
Español US 
Upper Clamp Joint Steel - ESD
- Connector used to assemble the HJ-15NP joint set
- Compatible with 28 mm pipes
- 300 units per box (please order individually)
- Electric conductivity (ESD) joint
The H-15NP is a chrome plated single joint with antistatic properties (ESD) used to assemble the HJ-15NP joint set. This piece can be used to connect a pipe with a surface.
Technical Informations:
This connector is designed with 2 striations for a better on the plastic coating of the 28 mm pipes. ADDITIONAL R HOLE?
ATTENTION
Make sure to choose the proper hardware to use with this part, since it is not used with the regular M6-25BWZ bolt. The H-15NP must be used with an H-16NP lower clamp joint, an M6-12BWZ bolt, and an M6-NWZ nut.
Non-Electric Conductivity Version:
A black version of this item if offered without antistatic properties: H-15
Want to reuse parts of your old system?
The H-15NP Flexpipe joint is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
All our joints are sold individually.
To make is easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system consider single amount only. Please enter the total amount of joint you wish to receive (example; 300 units = 1 box).
| Box Quantity | 300 |
|---|---|
| Length | 1 13/16 in (46 mm) |
| Height | 3/4 in (19 mm) |
| Width | 1 5/16 in (33 mm) |
| Weight | 0.084 lb (0.038 kg) |
| Box Dimensions | Cardboard box of 11 X 9 X 5 in (279 mm X 229 mm X 127 mm) |
| Compatible brand | Creform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm) |
| Non Compatible Brand | Fastube, Trilogiq (28.6 mm) |
| Primary Material | Hot rolled steel (SPHC) with chrome plating |
| Temperature Resistance | -148°F to 572°F (-100°C to 300°C) |
| Electric Conductivity (ESD) | Yes (10– 10^3) |
| Manufacturing Technique | Stamping and deburring |
