SKU
HJ-DS
Pipe mount drop stop
Pipe mount drop stop steel zinc
USD$2.19
Stocks
Farnham: 20904
Los Angeles: 3383
Lawrenceville: 6132
The HJ-DS is an all-in-one metal connector used to build sliding pipes. This part works well with the HJ-MS to create sliding pipes for the transportation of boxes, bins, and even surfaces. When assembling a sliding pipe, this part is usually positioned at the end of the slope or at the lowest point of the slope. Unlike the HJ-MS, this connector is a stopper to retain your container in the structure. This is mainly why we use the HJ-DS at the end of the slope.
Like the HJ-MS, this part can be used with an HJ-12 to build a movable arm with a hook at the end of it. This application is sometimes used as a security feature on structures. You just need to secure two F-A85/8 screws to connect this part.
The HJ-DS was previously considered an all-in-one black joint set of the HJ category. Since then, the HJ-DS became an accessory, and we changed its black coating to the ESD nickel-plated treatment. So now you can use it to create sliding pipes on antistatic structures.
Like the HJ-MS, this part can be used with an HJ-12 to build a movable arm with a hook at the end of it. This application is sometimes used as a security feature on structures. You just need to secure two F-A85/8 screws to connect this part.
The HJ-DS was previously considered an all-in-one black joint set of the HJ category. Since then, the HJ-DS became an accessory, and we changed its black coating to the ESD nickel-plated treatment. So now you can use it to create sliding pipes on antistatic structures.
Units per box (sold separately) | 60 |
---|---|
Height inches | 2 1/2 in (64mm) |
Width inches | 3 1/4 in (83mm) |
Depth inches | 1 5/16 in (33mm) |
Steel thickness inches | 1/8 in (2.5mm) |
Unit weight pounds | 0.319 lbs (0.145 kg) |
Box dimensions inches | 11 X 9 X 5 in (280mm X 225mm X 130mm) |
Compatible joint systems | Creform, NIS, C Tek Lean Solutions, Trilogiq (28 mm) |
Noncompatible joint systems | Fastube, Trilogiq (28.6 mm) |
RoHS certification | Yes |
Recyclable | Yes |
Compatible pipe systems | Creform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm) |
Noncompatible pipe systems | Trilogiq |
Frequency of use | Very high |
Reusable | Yes |
Electric conductivity (ESD) | Yes |
Material | Hot rolled steel (SPHC) |
Steel hardness (HRB) | 0.65 |
Finish | Shiny |
System operational temperature | -58°F à 185°F (-50°C à 85°C) |
Steel treatment | Galvanised |
Manufacturing technique | Folded and welded |
1- Make sure you have the following parts:
1 HJ-DS
2 F-A85/8
2 tubes 28mm de votre choix
1 Drill
2- Take the P1 pipe and insert it inside the HJ-DS.
3-Hang the HJ-DS on the P2 pipe.
4. Take two F-A85/8 and fix them in the corresponding openings.
1 HJ-DS
2 F-A85/8
2 tubes 28mm de votre choix
1 Drill
2- Take the P1 pipe and insert it inside the HJ-DS.
3-Hang the HJ-DS on the P2 pipe.
4. Take two F-A85/8 and fix them in the corresponding openings.

Write Your Own Review
Need more informations ?
Here's everything you need to know!