English US
English CA
Français CA
Español US
SKU
H-4NP
Cross junction joint
Cross junction joint steel cr
USD$1.21
Stocks
Farnham: 4303
Los Angeles: 13897
Lawrenceville: 18367
The H-4NP is a anti-static metal single joint needed to create joint sets known as HJ-3NP and HJ-4NP. This joint is mostly used to create joints that work best in the center of structures. Since this metal piece is part of the HJ-3NP, which is a critical connector, you should always keep a box of H-4NP handy. This part will not be used as much as the three first Hs. However, we know from experience at Flexpipe that this piece will be required frequently enough to justify keeping it in stock.
The H-4NP was built with six internal striations for optimal grip on the pipe's outer coating. This connector was also pre-drilled with three holes for the reinforcement of heavy-duty structures.
The Flexpipe H-4NP is compatible with the H-4NP equivalent of most connector systems available.
The H-4NP was built with six internal striations for optimal grip on the pipe's outer coating. This connector was also pre-drilled with three holes for the reinforcement of heavy-duty structures.
The Flexpipe H-4NP is compatible with the H-4NP equivalent of most connector systems available.
| Units per box (sold separately) | 150 |
|---|---|
| Height inches | 1 5/16 in (33mm) |
| Width inches | 5 1/8 in (130mm) |
| Depth inches | 1 5/16 in (33mm) |
| Steel thickness inches | 1/8 in (2.5mm) |
| Unit weight pounds | 0.233 lbs (0.106 kg) |
| Box dimensions inches | 11 X 9 X 5 in (280mm X 225mm X 130mm) |
| Compatible joint systems | Flexpipe, Creform |
| Noncompatible joint systems | Trilogiq, Fastube |
| Noncompatible joint systems | Trilogiq, Fastube |
| RoHS certification | Yes |
| Recyclable | Yes |
| Compatible pipe systems | Flexpipe, Creform, Fastube |
| Noncompatible pipe systems | Trilogiq |
| Frequency of use | High |
| Reusable | Yes |
| Electric conductivity (ESD) | Yes |
| Material | Hot rolled steel (SPHC) |
| Steel hardness (HRB) | 68-75 HRB |
| Finish | Shiny |
| UV resistance | High |
| System operational temperature | -148°F to 572°F (-100°C to 300°C) |
| Steel treatment | Chrome plating |
| Manufacturing technique | Stamping and deburring |
| Striations for grip | 6 striation grip lines |
| Positioning guide | 4 positioning guide lines |
| Additional reinforcement hole | 3 reinforcement holes |
Write Your Own Review
Products you may need
Need more informations ?
Here's everything you need to know!
