SKU
AO-EMT1
Pipe clamp single mount
Pipe clamp single steel zinc
USD$0.18
In stock
Only 2711 left
The AO-EMT1 is a metal clamp with a single mount. This clamp is perfect for permanently securing a surface to a pipe. Unlike other EMTs you can find at the store, this one was made to fit our 28mm pipes perfectly. The AO-EMT1 is the clamp of choice for surface borders. We recommend using the AO-EMT2 for all other applications on the inside area of a surface.
This clamp offers a more aesthetically pleasing look than other Flexpipe parts, because the screws will be placed on the surface and not above it. If you don't need to create corners using the AI-CORNER, then this clamp will create a better look. You can also use the AO-EMT1 to guide wires behind workstations. Since the EMT allows you to secure pipes without drilling in them, you can then quickly disassemble and reuse the same pipes for other projects.
We recommend the use of AO-EMT1 instead of AI-SUPPORT when building a working surface or lateral panel.
This clamp offers a more aesthetically pleasing look than other Flexpipe parts, because the screws will be placed on the surface and not above it. If you don't need to create corners using the AI-CORNER, then this clamp will create a better look. You can also use the AO-EMT1 to guide wires behind workstations. Since the EMT allows you to secure pipes without drilling in them, you can then quickly disassemble and reuse the same pipes for other projects.
We recommend the use of AO-EMT1 instead of AI-SUPPORT when building a working surface or lateral panel.
Best Seller | No |
---|---|
Units per box | 230 |
Height inches | 1 1/8 in (29mm) |
Width inches | 2 1/4 in (57mm) |
Depth inches | 13/16 in (21mm) |
Unit weight pounds | 0.044 lbs (0.020 kg) |
Box dimensions inches | 11 X 9 X 5 in (279mm X 229mm X 127mm) |
Recyclable | Yes |
Compatible pipe systems | Flexpipe, Creform, Fastube |
None compatible pipe systems | Trilogiq |
Reusable | Yes |
Electric conductivity (ESD) | Yes |
Material | Hot rolled steel (SPHC) |
Steel hardness (HRB) | 0.65 |
Finish | Glossy |
System operational temperature | -58°F à 185°F (-50°C à 85°C) |
Steel treatment | Galvanised |
Manufacturing technique | Folded and welded |
1- Make sure you have the following parts:
1 AO-EMT1
1 F-S81/2
1 Surface of your choice
1 28mm pipes of your choice
1 Drill
2- Take a AO-EMT1 and press it on the P1 pipe in the desired postion.
3- Fix the AO-EMT1 to the surface S1 with one F-S81/2 screws.
1 AO-EMT1
1 F-S81/2
1 Surface of your choice
1 28mm pipes of your choice
1 Drill
2- Take a AO-EMT1 and press it on the P1 pipe in the desired postion.
3- Fix the AO-EMT1 to the surface S1 with one F-S81/2 screws.

Need more informations ?
Here's everything you need to know!