Flat clamp joint set
In stock
- Compatible with 28 mm pipes
- Nuts and bolts are included, but packaged separately
- Assembly required
- Can be used to install decking
The HJ-15 is a black metal joint set that connects a tube to a surface. If you want to create both an anchor and support, this joint set is your best option.
To assemble an HJ-15 you need to put an H-15 together with an H-16, an M6-12B bolt, and an M6-N nut.
Assembly tip:
You can also create the same type of support with the following accessories: AO-SHIM and AO-EMT1. The first serve for leveling, while the second serves for fixing the pipe to the surface. Although this option is an alternative, we recommend that you considerate the HJ-15 as a first choice.
Technical Information:
This joint set is designed with 4 striations for a better grip on the plastic coating of the 28 mm pipes. It also includes an additional pre-drilled reinforcement hole to ensure extra strength to your structure. By adding a self-drilling screw F-A858, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.
Installation Steps:
See the installation steps tab to view how to assemble this connector.
Antistatic Version (ESD):
An electric conductivity version if offered if you wish to build antistatic structures: HJ-15NP
Want to reuse parts of your old system?
The HJ-15 Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
Please note that nuts and bolts are included, but packaged separately. Assembly is required.
Length | 1 13/16 in (46 mm) |
---|---|
Height | 1 5/16 in (33 mm) |
Width | 2 5/8 in (67 mm) |
Material Thickness | 1/8 in (2.5 mm) |
Weight (kg/lbs) | 0.200 lb (0.091 kg) |
Compatible brand | Creform, NIS, C Tek Lean Solutions, Trilogiq (28 mm) |
Non Compatible Brand | Fastube, Trilogiq (28.6 mm) |
Primary Material | Hot rolled steel (SPHC) with black cathodic electrodeposition (Ecoating) |
Temperature Resistance | -148°F to 572°F (-100°C to 300°C) |
Electric Conductivity (ESD) | No |
Manufacturing Technique | Stamping and deburring |
- Ensure you have the following parts:
- Group the H-15 with the H-16 connector around the first pipe. Ensure the connectors fit properly to the pipe.
- Fix the connectors together by placing the M6-12B bolt with the M6-N nut in the corresponding openings. Make sure to place the bolts on the most accessible side.
- Tighten completely until the HJ-15 joint set is firmly attached to the pipe. A force between 12-14 Nm is recommended for this step.
- Fix the HJ-15 joint set on the surface of your choice with an F-SF81 or any appropriate screw for the desired surface.
You can use the HJ-15 to install decking on a Flexpipe structure
You need to enter info before adding a new review.
Need more informations ?
Here's everything you need to know!