The HJ-15NP is a chrome-plated joint set with antistatic properties (ESD) that connects a tube to a surface. If you want to create both an anchor and support, this joint set is your best option.
You can also create the same type of support with the following accessories: AO-SHIM and AO-EMT1. The first serve for leveling, while the second serves for fixing the pipe to the surface. Although this option is an alternative, we recommend that you considerate the HJ-15NP as a first choice.
This joint set is designed with 4 striations for a better grip on the plastic coating of the 28 mm pipes. It also includes an additional pre-drilled reinforcement hole to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.
See the installation steps tab to view how to assemble this connector.
Non-Electric Conductivity Version:
A version of this joint set is offered without antistatic properties: HJ-15
Want to reuse parts of your old system?
The HJ-15NP Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
|Units per box||NA|
|Needed parts||1x H-15NP + 1x H-16NP + 1x M6-12BWZ + 1x M6-NWZ|
|Length inches||1 13/16 in (46 mm)|
|Width inches||1 5/16 in (33 mm)|
|External height inches||1 5/16 in (33mm)|
|External width inches||2 5/8 in (67mm)|
|External depth inches||1 5/16 in (33mm)|
|Steel thickness inches||1/8 in (2.5 mm)|
|Unit weight pounds||0.200 lbs (0.091 kg)|
|Compatible joint systems||Creform, NIS, C Tek Lean Solutions, Trilogiq (28 mm)|
|None compatible joint systems||Fastube, Trilogiq (28.6 mm)|
|Compatible pipe systems||Creform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm)|
|None compatible pipe systems||Trilogiq (28.6 mm)|
|Frequency of use||Moderate|
|Electric conductivity (ESD)||Yes|
|Material||Hot rolled steel (SPHC)|
|Steel hardness (HRB)||68-75 HRB|
|System operational temperature||-148°F to 572°F (-100°C to 300°C)|
|Steel treatment||Chrome plating|
|Manufacturing technique||Stamping and deburring|
|Striations for grip||4 striation grip lines|
|Additional reinforcement hole||1 reinforcement hole|
- Ensure you have the following parts:
- 1x H-15NP
- 1x H-16NP
- 1x M6-12BWZ bolt
- 1x M6-NWZ nut
- 1x 28mm ESD pipe of your choice
- 1x T-HANDLE 5mm hex key
- Group the H-15NP with the H-16NP connector around the first pipe. Ensure the connectors fit properly to the pipe.
- Fix the connectors together by placing the M6-12BWZ bolt with the M6-NWZ nut in the corresponding openings. Make sure to place the bolts on the most accessible side.
- Tighten completely until the HJ-15NP joint set is firmly attached to the pipe. A force between 12-14 Nm is recommended for this step.
- Fix the HJ-15NP joint set on the surface of your choice with an F-SF81 or any appropriate screw for the desired surface.
Need more informations ?
Here's everything you need to know!