English US
English CA
Français CA
Español US
SKU
H-16NP
Lower clamp joint
Lower clamp joint steel cr
USD$1.14
Stocks
Farnham: 3370
Los Angeles: 6924
Lawrenceville: 17967
The H-16NP is a anti-static metal single joint as well as the lower part of a joint set called HJ-15NP. To assemble this connector set, you will need to connect the H-16NP to an H-15NP joint. Originally, those components were a single piece. However, with the feedback of the assemblers at Flexpipe, we decide to break it up into two parts. The result was an easier way to install the HJ-15NP on a pipe.
The H-16NP should always be purchased with an H-16NP and an M6-12BWZ. Verify that you have selected the right bolt before purchasing because many of our customers choose the standard bolt called M6-25BWZ. We use the standard bolt for all the other sets except this one.
Take a look at the HJ-15NP product page to learn more about its applications.
The H-16NP should always be purchased with an H-16NP and an M6-12BWZ. Verify that you have selected the right bolt before purchasing because many of our customers choose the standard bolt called M6-25BWZ. We use the standard bolt for all the other sets except this one.
Take a look at the HJ-15NP product page to learn more about its applications.
| Units per box (sold separately) | 300 |
|---|---|
| Height inches | 3 1/4 in (83mm) |
| Width inches | 3 1/4 in (83mm) |
| Depth inches | 1 5/16 in (33mm) |
| Unit weight pounds | 0.101 lbs (0.046 kg) |
| Box dimensions inches | 11 X 9 X 5 in (279mm X 229mm X 127mm) |
| Compatible joint systems | Flexpipe, Creform |
| Noncompatible joint systems | Trilogiq, Fastube |
| Noncompatible joint systems | Trilogiq, Fastube |
| RoHS certification | Yes |
| Recyclable | Yes |
| Compatible pipe systems | Flexpipe, Creform, Fastube |
| Noncompatible pipe systems | Trilogiq |
| Frequency of use | Moderate |
| Reusable | Yes |
| Electric conductivity (ESD) | No |
| Material | Hot rolled steel (SPHC) |
| Steel hardness (HRB) | 0.65 |
| Finish | Glossy |
| UV resistance | High |
| System operational temperature | -40°F à 122°F (-40°C à 50°C) |
| Steel treatment | Black cathodic electrodeposition (Ecoating) |
| Manufacturing technique | Pressed and deburring |
| Striations for grip | 2 |
| Additional reinforcement hole | 1 |
Write Your Own Review
Products you may need
Need more informations ?
Here's everything you need to know!
