English US
English CA
Français CA
Español US
Corner bracket
- Embed surfaces
- Reinforce corners
- Accentuate pipe borders
The AI-CORNER can be used to embed surfaces 3/4" to 1/4" inch in depth for carts, workstations and presentation boards. (x4) AI-CORNER
This item makes pipes stand out and accentuates the definition of the borders. We use this technique to define the board's contour and provides a frame effect with the pipes. A practical solution to prevent items from sliding off any surface.
It can also be used to reinforce the corners of structures.
Install various corners in V, C, X or square shapes to create the setup you like.
Can be combined with the AI-SUPPORT and AI-CENTER
Antistatic (ESD):
Compatible with EP-96-ST and EP-96-BK
Installation Steps:
See the installation steps tab to view how to install the AI-CORNER
Want to reuse parts of your old system?
The AI-CORNER is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and non-compatible with our parts.
| Units per box (sold separately) | 60 |
|---|---|
| Height inches | 15/16 in (24mm) |
| Width inches | 4 5/8 in (117mm) |
| Depth inches | 4 5/8 in (117mm) |
| Unit weight pounds | 0.158 lbs (0.072 kg) |
| Box dimensions inches | 11 X 9 X 5 in (279mm X 229mm X 127mm) |
| Recyclable | Yes |
| Compatible pipe systems | Flexpipe, Creform, Fastube |
| Noncompatible pipe systems | Trilogiq |
| Reusable | Yes |
| Electric conductivity (ESD) | Yes |
| Material | Hot rolled steel (SPHC) |
| Steel hardness (HRB) | 0.65 |
| Finish | Glossy |
| System operational temperature | -58°F à 185°F (-50°C à 85°C) |
| Steel treatment | Galvanised |
| Manufacturing technique | Folded and welded |
- Ensure you have the following parts:
- 4x AI-CORNER
- 8x F-A85/8
- 4x F-S81/2
- 2x 28mm pipes of your choice
- 1x Surface of your choice
- 1x Drill w/ #2 square head
- Press-fit AI-CORNER on P1 and P2 pipes.
- Fix the AI-CORNER to the P1 and P2 pipes with two F-A85/8 screws.
- Repeat steps 2 and 3 for the other corresponding corners.
- Inlay the S1 surface on the four AI-CORNER
- Fix the S1 surface to the four AI-CORNER with the help of four F-S81/2 screws.
Products you may need
Need more informations ?
Here's everything you need to know!
