Please select a wishlist
SKU
HJ-13NP

Parallel joint set

Parallel joint set steel cr
USD$1.79

In stock

  • Compatible with 28 mm pipes
  • Assembly required
  • Joint set with antistatic properties (ESD)

The HJ-13NP is a chrome-plated joint set with antistatic properties (ESD) generally used to reinforce the structure's capacity.

To assemble an HJ-13NP you need to put two H-13NP together with an M6-25BWZ bolt and an M6-NWZ nut.

Assembly tip:
This joint set is frequently used for the assembly of workstation, rack or cart requiring a high load capacity. For more information on the different ways to increase your structure's loading capacity, read our article How to calculate the loading capacity for modular structures.

Installation Steps:
See the installation steps tab to view how to assemble this connector.

Non-Electric Conductivity Version:
A version of this joint set is offered without antistatic properties: HJ-13

Want to reuse parts of your old system?
The HJ-13NP Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

More Information
Best SellerNo
Units per boxNA
Needed parts2x H-13NP + 1x M6-25BWZ + 1x M6-NWZ
Length inches2 11/16 in (68 mm)
Width inches1 5/16 in (33 mm)
External height inches1 5/16 in (33mm)
External width inches2 11/16 in (94mm)
External depth inches1 5/16 in (33mm)
Steel thickness inches1/8 in (2.5 mm)
Unit weight pounds0.253 lbs (0.115 kg)
Compatible joint systemsCreform, NIS, C Tek Lean Solutions, Trilogiq (28 mm)
None compatible joint systemsFastube, Trilogiq (28.6 mm)
RoHS certificationYes
RecyclableYes
Compatible pipe systemsCreform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm)
None compatible pipe systemsTrilogiq (28.6 mm)
Frequency of useModerate
ReusableYes
Reusable partsYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)68-75 HRB
FinishShiny
UV resistanceHigh
System operational temperature-148°F to 572°F (-100°C to 300°C)
Steel treatmentChrome plating
Manufacturing techniqueStamping and deburring
Striations for gripNone
Positioning guideNone
Additional reinforcement holeNone
  1. Ensure you have the following parts:
    • 2x H-13NP
    • 1x M6-25BWZ bolt
    • 1x M6-NWZ nut
    • 2x 28mm ESD pipes of your choice
    • 1x T-HANDLE 5mm hex key
  2. Group the two H-13NP connectors around the first and the second pipe.
  3. Fix the connectors together by placing the M6-25BWZ bolt with the M6-NWZ nut in the corresponding openings and completely tighten until the HJ-13 joint set is firmly attached to the pipes. Make sure to place the bolts on the most accessible side. A force between 12-14 Nm is recommended for this step.