Please select a shopping list

5 way cross joint set

5 way cross joint set steel bk

In stock

  • Compatible with 28 mm pipes
  • Nuts and bolts are included, but packaged separately
  • Assembly required

The HJ-5 is a black metal joint set that allows you to create a five-pipe intersection on three axes. This joint set is used in very specific situations such as the addition of a flag or for the installation of a caster right in the middle at the bottom of a structure.

To assemble an HJ-5 you need to combine four H-2 together with four M6-25B bolts and four M6-N nuts.

Assembly tip:
Before considering the HJ-5, we suggest thinking of using other joint sets that will have less impact on the strength of the structure: HJ-2 / HJ-3 or HJ-4

Technical Information:
This joint set is designed with 16 striations for a better grip on the plastic coating of the 28 mm pipes. It also includes 8 additional pre-drilled reinforcement holes to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.

Installation Steps
See the installation steps tab to view how to assemble this connector.

Antistatic Version (ESD):
An electric conductivity version if offered if you wish to build antistatic structures: HJ-5NP

Want to reuse parts of your old system?
The HJ-5 Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

Please note that nuts and bolts are included, but packaged separately. Assembly is required.

More Information
Frequency of UseVery low
Electric Conductivity (ESD)No
Manufacturing TechniqueStamping and deburring
  1. Ensure you have the following parts:
  2. Fix two H-2 connectors with an M6-25B and an M6-N in the corresponding openings and loosely tighten. Repeat process with the remaining two H-2 connectors.
  3. Group the two pairs of H-2 connectors around the first pipe and loosely tighten using the remaining M6-25B and M6-N.
  4. Insert the second, the third, the fourth and the fifth pipes within the openings of the HJ-5, and between the first and the second positioning guidelines.
  5. Tighten the M6-25B and the M6-N until the HJ-5 is firmly attached to the five pipes.

You need to enter info before adding a new review.

Write Your Own Review
You're reviewing:5 way cross joint set