Please select a shopping list

Round angle joint set

Round joint set steel cr

In stock

  • Compatible with 28 mm pipes
  • Nuts and bolts are included, but packaged separately
  • Assembly required
  • Joint set with antistatic properties (ESD)

The HJ-90NP is a chrome-plated joint set with antistatic properties (ESD) that allows connecting two 28 mm pipes to create a 90-degree corner. This joint set is often used for ergonomic cart handles.

To assemble an HJ-90NP you need to put two H-90NP together with two M6-25BWZ bolts and two M6-NWZ nuts.

Technical Information:
This joint set is designed with 8 striations for a better grip on the plastic coating of the 28 mm pipes. It also includes 4 additional pre-drilled reinforcement holes to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.

Installation Steps:
See the installation steps tab to view how to assemble this connector.

Non-Electric Conductivity Version:
A version of this joint set is offered without antistatic properties: HJ-90

Want to reuse parts of your old system?
The HJ-90NP Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

Please note that nuts and bolts are included, but packaged separately. Assembly is required.

More Information
Common UsageHandle corner
Frequency of UseHigh
Electric Conductivity (ESD)Yes
Manufacturing TechniqueStamping and deburring
  1. Ensure you have the following parts:
    • 2x H-90NP
    • 2x M6-25BWZ bolts
    • 2x M6-NWZ nuts
    • 2x 28mm pipes of your choice
    • 1x T-HANDLE 5mm hex key
  2. Group the two H-90NP connectors around the first and the second pipe, between the first and the second positionning guidelines.
  3. Fix the connectors together by placing the M6-25BWZ bolts with the M6-NWZ nuts in the corresponding openings. Make sure to place the bolts on the most accessible side.
  4. Tighten completely until the HJ-90NP joint set is firmly attached to the two pipes. A force between 12-14 Nm is recommended for this step.

You need to enter info before adding a new review.

Write Your Own Review
You're reviewing:Round angle joint set