Please select a wishlist

Embed bracket support

Embed bracket steel zinc
In stock
Only 755 left
The AI-SUPPORT is a metal anchor joint that increases the number of supporting points for surfaces. We use this accessory with the AI-CORNER to create embedded surfaces on Flexpipe structures. This anchor joint is ideal for small to medium surfaces that are rigid enough not to bend easily when opposing some pressure. This part ensure that your working surface will stay flat along its entire length.

There is also a stronger alternative to the AI-SUPPORT, known as the AI-CENTER. We recommend you check this product page if you are building structures with a large working surface or if you intend to place heavy loads on your surface.

The AI-SUPPORT is a less expensive and less intrusive product than its counterpart. You will probably need to use both products in certain cases or create a mixed configuration, which is likely to be the optimal solution budget-wise and for space-saving purposes.
More Information
Best SellerNo
Units per box100
Height inches7/8 in (22mm)
Width inches2 1/2 in (64mm)
Depth inches1 11/16 in (43mm)
Unit weight pounds0.154 lbs (0.070 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
1- Make sure you have the following parts:
1 F-A85/8
1 F-S81/2
1 Surface of your choice
1 28mm pipes of your choice
1 Drill
2- Take a AI-SUPPORT and install it on the P1 pipe in the desired postion.
3- Fix the AI_SUPPORT to the P1 pipe with one F-A85/8 screw.
4- Install the S1 surface of the AI-SUPPORT.
5- Fix the S1 surface to AI-SUPPORT with one F-S81/2 screw.