Double pipe single hinge set

Name: Double pipe single hinge set
SKU: HJ-23NP
Price: 3.52 CAD
Availability: InStock

Double pipe hinge set steel cr

Be the first to review this product

CDN$3.52

In stock

Compatible with 28 mm pipes
Nuts and bolts are included, but packaged separately
Assembly required; pieces sold separately
Joint set with antistatic properties (ESD)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The HJ-23NP is a chrome-plated joint set with antistatic properties (ESD) generally used to reinforce the structure's capacity. This joint set is very similar to the HJ-13NP, with the only difference that it includes a hinge bracket that allows it to rotate over an opening radius of almost 360 degrees, depending on your structure configuration.

To assemble an HJ-23NP you need to put two H-23NP together with an AP-HINGE hinge bracket, an M6-25BWZ bolt and an M6-NWZ nut.

Assembly tip:
This joint set is frequently used for the assembly of folding tables, doors or on any other structures requiring a moving part. Due to the hinge bracket, we recommend using an AO-SHIM plastic shim to prevent the connector from sliding on the pipe. Consider the HJ-12NP if you need similar applications of the HJ-23NP, but with two perpendicular tubes.

Installation Steps
See the installation steps tab to view how to assemble this connector.

Non-Electric Conductivity Version:
A version of this joint set is offered without antistatic properties: HJ-23

Want to reuse parts of your old system?
The HJ-23NP Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

Please note that nuts and bolts are included, but packaged separately. Assembly is required.

Technical Information

More Information
Box Quantity	NA
Frequency of Use	Very low
Electric Conductivity (ESD)	Yes
Manufacturing Technique	Stamping and deburring

Installation Steps

Ensure you have the following parts:
- 2x H-23NP
- 1x AP-HINGE
- 1x M6-25BWZ
- 1x M6-NWZ
- 2x 28mm ESD pipes of your choice
- 1x T-HANDLE 5mm hex key
Press the AP-HINGE bracket on the first pipe until it clips on, place opening of the bracket inside of the pipe.
Group the two H-23NP connectors around the first and the second pipe. Make sure that the AP-HINGE bracket teeth fit into the corresponding openings. Slide the H-23NP connectors into place to lock them together.
Fix the connectors together by placing the M6-25BWZ with the M6-NWZ in the corresponding openings, and tighten completely until the HJ-23NP joint set is firmly attached to the two pipes.
If the HJ-23NP feels too tight to rotate, apply a lubricant spray to ease the mobility of the AP-HINGE bracket and to avoid damaging the plastic teeth.