Tee hinge joint
- Connector used to assemble the HJ-12 joint set
- Compatible with 28 mm pipes when used with an AP-HINGE bracket
- 180 units per box (please order individually)
The H-12 is a black metal single joint used to assemble the HJ-12 joint set. This piece is a different version of the H-1 that can be assembled on an AP-HINGE bracket to create a swivel 90-degree angle. Without the hinge, the H-12 can't be assembled on 28 mm pipes. Make sure you have enough AP-HINGE in inventory when you choose this piece.
Technical Informations:
This connector is designed with 2 striations for a better on the plastic coating of the 28 mm pipes. It also includes 1 additional pre-drilled reinforcement hole to ensure extra strength to your structure. By adding a self-drilling screw F-A858, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.
Antistatic Version (ESD):
An electric conductivity version if offered if you wish to build antistatic structures: H-12NP
Want to reuse parts of your old system?
The H-12 Flexpipe joint is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
All our joints are sold individually.
To make is easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system consider single amount only. Please enter the total amount of joint you wish to receive (example; 180 units = 1 box).
Box Quantity | 180 |
---|---|
Length | 3 5/16 in (84 mm) |
Height | 3/4 in (19 mm) |
Width | 1 5/16 in (33 mm) |
Weight | 0.139 lb (0.063 kg) |
Box Dimensions | Cardboard box of 11 X 9 X 5 in (279 mm X 229 mm X 127 mm) |
Compatible brand | Creform, NIS, C Tek Lean Solutions, Trilogiq (28 mm) |
Non Compatible Brand | Fastube, Trilogiq (28.6 mm) |
Primary Material | Hot rolled steel (SPHC) with black cathodic electrodeposition (Ecoating) |
Temperature Resistance | -148°F to 572°F (-100°C to 300°C) |
Electric Conductivity (ESD) | No |
Manufacturing Technique | Stamping and deburring |
You need to enter info before adding a new review.
Need more informations ?
Here's everything you need to know!