Please select a shopping list
SKU
HJ-1

Tee joint set

Tee joint set steel bk
CDN$1.25

In stock

  • Compatible with 28 mm pipes
  • Assembly required

The HJ-1 is a black metal joint set that allows you to connect two 28 mm pipes in a T-shape or to create a corner. You can rotate this connector up to 360-degree before fixing it to make 45- or 90-degree support for surfaces or just for supporting your products.

This connector was designed for a quick and easy installation. This piece is the simplest to assemble and the most commonly used in the entire Flexpipe system. Applications for this connector are numerous; from corners to separations, pegs, 45-degree supports and supports for accessories like the AW-HOLDER. To assemble an HJ-1 you need to put two H-1 together with an M6-25B bolt and an M6-N nut. You should always keep a box of these three parts in inventory since they are going to be used in 95% of your Flexpipe structures.

Technical Information:
This joint set is designed with 8 striations for a better grip on the plastic coating of the 28 mm pipes. It also includes 4 additional pre-drilled reinforcement holes to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.

Installation Steps
See the installation steps tab to view how to assemble this connector.

Antistatic Version (ESD):
An electric conductivity version if offered if you wish to build antistatic structures: HJ-1NP

Want to reuse parts of your old system?
The HJ-1 Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

More Information
Best SellerYes
Units per boxNA
Needed parts2 (H1) + 1 (M6-25B) + 1 (M6-N)
Length inches3 1/4 in (83 mm)
Width inches1 5/16 in (33 mm)
External height inches3 1/4 in (83mm)
External width inches1 5/16 in (33mm)
External depth inches1 5/16 in (33mm)
Steel thickness inches1/8 in (2.5 mm)
Unit weight pounds0.315 lbs (0.143 kg)
Compatible joint systemsCreform, NIS, C Tek Lean Solutions, Trilogiq (28 mm)
None compatible joint systemsFastube, Trilogiq (28.6 mm)
RoHS certificationYes
RecyclableYes
Compatible pipe systemsCreform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm)
None compatible pipe systemsTrilogiq (28.6 mm)
Frequency of useVery high
ReusableYes
Reusable partsAll
Electric conductivity (ESD)No
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)68-75 HRB
FinishGlossy
UV resistanceHigh
System operational temperature-148°F to 572°F (-100°C to 300°C)
Steel treatmentBlack cathodic electrodeposition (Ecoating)
Manufacturing techniqueStamping and deburring
Striations for grip8 striation grip lines
Positioning guide4 positioning guide lines
Additional reinforcement hole4 reinforcement holes
  1. Ensure you have the following parts:
    • 2x H-1
    • 1x M6-25B bolts
    • 1x M6-N nuts
    • 2x 28mm pipes of your choice
    • 1x T-HANDLE 5mm hex key
  2. Put the two H-1 together around the first pipe.
  3. Loosely tighten the M6-25B bolt and the M6-N nut by putting them in the corresponding opening of the HJ-1. Make sure to put the bolt on the most accessible side.
  4. Insert the second pipe between the two H-1 at the opposite side of the joint, between the first and second guidelines.
  5. Tighten completely the M6-25B and the M6-N together until the HJ-1 is firmly attached to the pipes. A force between 12-14 Nm is recommended for this step.