Please select a shopping list

Track mount drop stop

Track mount drop stop steel zinc
Farnham: 1301
Los Angeles: 1091
Lawrenceville: 472
  • Electric conductivity (ESD)
  • Track mount with a 1-5/16 in drop stopper
  • Compatible with other 1 1/16 in (28 mm) pipe and joint systems

The R85-DS is an ESD steel zinc conveyor track mount with a 1-5/16 in drop stopper. This mount will make your roller track tilted so that it makes a small angle, even if the pipes are parallel to the track. Use this part as an end mount to make heavyweight containers stops.

When you are using lightweight containers, you won't need an angle that creates too much acceleration, so we recommend using R85-TS.

The anchoring section has two little bumps to make sure the support grips the tube firmly. We recommend using an F-A85/8 screw to secure the support on the pipe.

All Flexpipe conveyor R85 accessories are engineered to perfectly fit the R85-RT96.

The Flexpipe roller track and its accessories will work on any 28 mm pipe and joint systems. Some systems don't have the same conveyor size, so be sure to check the spec sheet to see if your old conveyor parts are compatible.

Learn more on different accessories' configuration on the How to build modular flow racks page. Every part of the Flexpipe conveyor system is ESD, allowing you to build antistatic structures for the transportation of electronics and electrical components.

Don't know where to begin? Our flow rack starter kit could be really helpful!

More Information
Units per box (sold separately)15
Length inches3 1/16 in (78 mm)
Height inches2 3/4 in (70mm)
Width inches1 13/16 in (45.6 mm)
Depth inches1 3/8 in (35.5 mm)
Unit weight pounds0.24 lbs (0.528 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
Total height inches2 7/8 in (72.3 mm)
Compatible support systemsCreform, NIS, C Tek, Fastube
Compatible conveyor systemsCreform, NIS, C Tek, Fastube small wheel conveyors
Noncompatible conveyor systemsTrilogiq
Compatible pipe systemsFlexpipe, Creform, Fastube
Noncompatible pipe systemsTrilogiq
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
System operational temperature-148°F to 428°F (-100°C to 220°C)
Steel treatmentGalvanized
Manufacturing techniquePressed and deburring
Additional reinforcement holeYes
Load capacity per meter pounds595 lb (270 kg)
Rail materialHot rolled steel (SPHC)
  1. Ensure you have the following parts:
  2. Insert the R85-RT96 inside the R85-DS.
  3. Hang the R85-DS on the pipe perpendicularly.
  4. Screw a F-A85/8 in the corresponding opening through the pipe to fix the R85-DS mount.
Write Your Own Review
You're reviewing:Track mount drop stop
Tips from the expert
Jonathan Home
Here is a good rule of thumb for the R40-DS. If you need to double your pipe to reinforce a structure, you probably need to put a drop stop instead of the tab stop R40-TS.
Tips by Jonathan Home - Industrial Designer