Please select a shopping list
SKU
H-2NP

Inner corner joint

Inner corner joint steel cr
CDN$1.46
Stocks
Farnham: 18794
Los Angeles: 17736
Lawrenceville: 13274
  • Connector used to assemble the HJ-2NP / HJ-3NP / HJ-5NP joint sets
  • Compatible with 28 mm pipes
  • 150 units per box (please order individually)
  • Electric conductivity (ESD) joint

The H-2NP is a chrome plated single joint with antistatic properties (ESD) used to assemble the HJ-2NP / HJ-3NP / HJ-5NP joint sets. This piece is one of the easiest and fastest to assemble.

We suggest you to always have a box of H-2 or H-2NP in inventory, since it is necessary for the assembly of three different joint sets. If you would like to keep an inventory of the Flexpipe parts, this video could help you konw the percentage of each parts we suggest to order according to your needs.

Technical Informations:
This connector is designed with 4 striations for a better on the plastic coating of the 28 mm pipes. It also includes 2 additional pre-drilled reinforcement holes to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.

Non-Electric Conductivity Version:

A black version of this item if offered without antistatic properties: H-2

Want to reuse parts of your old system?
The H-2NP Flexpipe joint is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

All our joints are sold individually.
To make is easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system consider single amount only. Please enter the total amount of joint you wish to receive (example; 150 units = 1 box).

More Information
Box Quantity150
Length2 9/16 in (65 mm) on each side
Height3/4 in (19 mm)
Width1 5/16 in (33 mm)
Weight0.207 lb (0.094 kg)
Box DimensionsCardboard box of 11 X 9 X 5 in (279 mm X 229 mm X 127 mm)
Compatible brandCreform, NIS, C Tek Lean Solutions, Trilogiq (28 mm)
Non Compatible BrandFastube, Trilogiq (28.6 mm)
Primary MaterialHot rolled steel (SPHC) with chrome plating
Temperature Resistance-148°F to 572°F (-100°C to 300°C)
Electric Conductivity (ESD)Yes (10– 10^3)
Manufacturing TechniqueStamping and deburring

You need to enter info before adding a new review.

Write Your Own Review
You're reviewing:Inner corner joint