Please select a shopping list
SKU
AI-CENTER

Embed pipe support

Embed pipe steel zinc
CDN$1.80
Only 4473 left
  • Improve support capacity
  • Adds rigidity to surfaces
  • Galvanized steel

The AI-CENTER is a metal anchor joint that improves the supporting capacity of a surface.

We use this product with the AI-CORNER and as an alternative or a complement to the AI-SUPPORT to create more contact points with an embedded working surface.

The AI-CENTER's role is to be a perfect anchor for large surfaces that would have the tendency to bend under heavy loads, it is a stronger solution to the AI-SUPPORT.

Unlike the HJ-MS and HJ-DS, the AI-CENTER is not designed to hold containers like boxes and bins because of its upper, rounded part. This product is intended to support surfaces. 

Antistatic (ESD):

Compatible with EP-96-ST and EP-96-BK

Installation Steps:
See the installation steps tab to view how to install the AI-CENTER

Want to reuse parts of your old system?
The AI-CENTER is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and non-compatible with our parts.

 




More Information
Best SellerNo
Units per box60
Height inches2 1/16 po (52mm)
Width inches3 1/4 po (59mm)
Depth inches1 3/16 po (30mm)
Unit weight pounds0.290 lbs (0.132 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
  1. Ensure you have the following parts:
    • 1x AI-CENTER
    • 2x F-A85/8
    • 4x F-S81/2
    • 2x 28mm pipes of your choice
    • 1x Drill w/ #2 square head
  2. Slide the P1 pipe inside of AI-CENTER.
  3. Press fit the AI-CENTER on P2 pipe.
  4. Fix two F-A85/8 screws into corresponding openings.