Please select a shopping list

Parallel hinge joint set - DISCONTINUED

Paral. hinge joint set steel cr - DISCONTINUED

In stock



Please, see our regular HJ-23NP 

More Information
Units per box (sold separately)NA
Needed parts2 (H19) + 1 (AP-HINGE) + 1 (M6-25B) + 1 (M6-N)
External height inches1 7/8 in (48mm)
External width inches3 5/16 in (84mm)
External depth inches1 1/2 in (38mm)
Unit weight pounds0.319 lbs (0.145 kg)
RoHS certificationYes
Frequency of useVery low
Reusable partsYes
range of motion360°
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentNickel electroplating
Striations for grip8
Additional reinforcement hole4
1- Make sure you have the following parts:
2 H-19NP
1 M6-25BWZ
1 M6-NWZ
2 28mm pipes of your choice
1 Allen key or one drill equipped with an Allen Key 5mm tip
2- Take two AP-Hinge and press them on the P1 and P2 pipes until the hinge are fix. 3- Take two connectors H-19NP and group them around the both AP-HINGE.
4-Take a M6-25BWZ bolt and a M6-NWZ nut and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.
5- Tighten completely the M6-25BWZ bolt and M6-NWZ nut together until the HJ-19NP attached firmly to hinge . A force of 9.8 Nm is recommended for this step.
Write Your Own Review
You're reviewing:Parallel hinge joint set - DISCONTINUED