Please select a shopping list
SKU
HJ-9

Flat anchor joint set

Flat anchor joint set steel bk
USD$1.93

In stock

The HJ-9 is a metal anchor joint that allows you to fix Flexpipe structures on virtually any kind of flat surface. This connector is unique in our selection of joints, because even if some of its applications involve other Flexpipe parts, the vast majority of them are related the external environment where a structure is located. You can, of course, use this joint to connect pipes with working surfaces. However, we mostly use this product to fix entire structures to floors, walls, ceilings, and other furniture.

To make an HJ-9, you need to regroup two H-9 together with one M6-25B bolt and one M6-N nut. The HJ-9 is the ideal solution to building permanent and fixed workstations or racks. We also use it to connect boards to a wall or a rack to a ceiling. The next application is less relevant for manufacturing floors . However, you can use the HJ-9 to create suspended cabinets and shelves in your office by fixing those to a wall or to the ceiling.

The applications are limitless with this connector, and we encourage you to be imaginative with it. If you need to secure your Flexpipe Structure to the edge of something, please use the H-8, as it is more qualified for this application.
More Information
Best SellerNo
Units per boxNA
Needed parts2 (H9) + 1 (M6-25B) + 1 (M6-N)
External height inches2 1/4 in (57mm)
External width inches2 13/16 in (71mm)
External depth inches1 5/16 in (33mm)
Unit weight pounds0.293 lbs (0.133 kg)
RoHS certificationYes
RecyclableYes
Frequency of useModerate
Reusable partsYes
Electric conductivity (ESD)No
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentBlack cathodic electrodeposition (Ecoating)
Striations for grip4
1- Make sure you have the following parts:
2 H-9
1 M6-25B
1 M6-N
2 28mm pipes of your choice
1 Allen key or one drill equipped with an Allen key with a 5 mm tip
2-Take two connectors H-9 and group them around the P1 pipe.
3-Take a M6-25B bolt and a M6-N nut and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.
4- Tighten completely the M6-25B bolt and M6-N nut together until the HJ-9 attached firmly to the P1 pipe. A force of 9.8 Nm is recommended for this step.
5- Fix the HJ-9 on the surface of your choice with four F-C61 or four appropriate screw for the desired surface.