Please select a shopping list

Standard tee joint

Standard tee joint steel cr
Farnham: 28537
Los Angeles: 114275
Lawrenceville: 15714
  • Connector used to assemble the HJ-1NP joint set
  • Compatible with 28 mm pipes
  • 225 units per box (please order individually)
  • Electric conductivity (ESD) joint

The H-1NP is a chrome-plated single joint with antistatic properties (ESD) used to assemble the HJ-1NP joint set. This piece is one of the easiest and fastest to assemble.

We suggest you to always have a box of H-1 or H-1NP in inventory since it is the connector used in 95% of the structures. If you would like to keep an inventory of the Flexpipe parts, this video could help you know the percentage of each part we suggest to order according to your needs.

Technical Information:
This connector is designed with 4 striations for a better on the plastic coating of the 28 mm pipes. It also includes 2 additional pre-drilled reinforcement holes to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.

Non-Electric Conductivity Version:
A black version of this item if offered without antistatic properties: H-1

Want to reuse parts of your old system?
The H-1NP Flexpipe joint is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

All our joints are sold individually.
To make it easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system considers single amount only. Please enter the total amount of joint you wish to receive (example; 225 units = 1 box).

More Information
Box Quantity225
Length3 1/4 in (83 mm)
Height3/4 in (19 mm)
Width1 5/16 in (33 mm)
Weight0.147 lb (0.067 kg)
Box DimensionsCardboard box of 11 X 9 X 5 in (279 mm X 229 mm X 127 mm)
Compatible brandCreform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm)
Non Compatible BrandTrilogiq (28.6 mm)
Primary MaterialHot rolled steel (SPHC) with chrome plating
Temperature Resistance-148°F to 572°F (-100°C to 300°C)
Frequency of UseHigh
Electric Conductivity (ESD)Yes (10– 10^3)
Manufacturing TechniqueStamping and deburring

You need to enter info before adding a new review.

Write Your Own Review
You're reviewing:Standard tee joint