English CA
Français CA
English US
Español US
Corner stacking support
- Supports corners
- Great for stacking structures
- 20 units per box (please order individually)
The AC-SKID is a metal accessory you can attach to an HJ-2 to create a supporting corner. As the name suggests, this product was intended to support and retain skids.
You can also use it to maintain pipe structures like racks and carts. Some structures have wheels that are too big for the AF-STACK, but not for this accessory.
The AC-SKID is attached directly to the joint set with two F-A85/8 screws. Unlike the AF-STACK, you can't use this product as a foot.
Antistatic (ESD):
Compatible with EP-96-ST and EP-96-BK
Installation Steps:
See the installation steps tab to view how to install the AC-SKID.
Want to reuse parts of your old system?
The AC-SKID is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and non-compatible with our parts.
| Box Quantity | 20 |
|---|---|
| Length | 3 1/8 in (79 mm) |
| Height | 2 5/8 in (67 mm) |
| Width | 3 1/8 in (79 mm) |
| Weight | 0.605 lb (0.275 kg) |
| Box Dimensions | Cardboard box of 11 X 9 X 5 in (279 mm X 229 mm X 127 mm) |
| Compatible brand | Flexpipe, Creform, Fastube |
| Non Compatible Brand | Trilogiq |
| Primary Material | Galvanised Hot rolled steel (SPHC) |
| Temperature Resistance | -58°F to 185°F (-50°C to 85°C) |
| Electric Conductivity (ESD) | Yes |
- Ensure you have the following parts:
- 1x AC-SKID
- 2x F-A85/8
- 1x HJ-2 joint in corner
- 2x 28mm pipes of your choice
- 1x Drill w/ #2 square head
- Place a AC-SKID on top of the HJ-2 joint.
- Secure the AC-SKID to the HJ-2 joint using two F-A85/8 screws in the corresponding openings
You need to enter info before adding a new review.
Products you may need
Need more informations ?
Here's everything you need to know!
