Right side caster plate

Right caster plate steel bk

Be the first to review this product

CDN$28.21

Stocks

Farnham: 1093

Los Angeles: 493

Lawrenceville: 698

ideal for transporting heavy loads
Hardware pre-assembled
Intended for plate casters

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The WF-RPLATE is a black-coated steel Heavy Duty caster plate that can be used for reinforcing structures that require extra strength to the base.

This Heavy Duty caster plate is intended to be used with carts that require to transport heavy parts and/or racks that require massive support capacity.

It is designed to be used with 6-inch casters but hole patterns can also accomodate 4 inch plate casters.

Installation steps:
The WF-RPLATE comes pre-assembled with (x4) washers, (x4) lock nuts and (x4) bolts. This hardware is to fasten the caster to the plate and (x4) (5mm) set screws used to secure the pipes into the openings of the RPLATE. See the installation steps tab to see how to assemble this caster plate.

Want to reuse parts of your old system?
The WF-RPLATE Flexpipe Heavy Duty Caster plate is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

Technical Information

More Information
Units per box (sold separately)	2
Unit weight pounds	4.246 lbs (1.930 kg)
Box dimensions inches	11 X 9 X 5 in (279mm X 229mm X 127mm)
Recyclable	Yes
Compatible pipe systems	Flexpipe, Creform, Fastube
Noncompatible pipe systems	Trilogiq
Reusable	Yes
Electric conductivity (ESD)	Yes
Material	Hot rolled steel (SPHC)
Steel hardness (HRB)	0.65
Finish	Glossy
System operational temperature	-58°F à 185°F (-50°C à 85°C)
Steel treatment	Galvanised
Manufacturing technique	Folded and welded

Installation Steps

1. Install the tubes in the WF-RPLATE

  - Unscrew the 4 screws to the max.without removing them

  - Insert the tubes until they touch the bottom of the cylinder

  - Fasten the screws so that the head does not protrude

2.Install the wheels

  - With the screws supplied with the WF-RPLATE, take a bolt with a washer

  - Install the wheel in the desired direction

  - Insert the bolt into one of the holes and replace a washer and nut on the other side

  - Repeat for the other 3 holes

  - Tighten the 4 bolts