Please select a shopping list
SKU
R40-MS

Track mount start

Track mount start steel zinc
USD$1.40
In stock
Only 8067 left
The R40-MS is a metal conveyor mount used at the starting point of rail tracks. This product serves as an anchor between the conveyor and a perpendicular pipe. You should always start your tracks with this product. The other situation where you should use the R40-MS is when creating L-shaped and Z-shaped flow racks, where you don't want your containers to stop in the middle of the process. Using this item at the end of all tracks that are not final is a good idea if you want the boxes or bins to move easily.

The R40-MS was designed to fit precisely in the Flexpipe conveyor and to fit on any 28mm steel pipe. The anchoring section has two little bumps to make sure the connector grips the tube firmly. This feature is just an addition to the F-A85/8 screw you will need to secure for the joint on the pipe.

The conveyor mount is galvanized, like the other conveyor accessories to let you create stunning flow racks.
More Information
Best SellerYes
Units per box30
Height inches1 5/8 in (41mm)
Width inches1 5/8 in (41mm)
Depth inches3 5/16 in (84mm)
Unit weight pounds0.341 lbs (0.155 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
Compatible conveyor systemsFlexpipe, Creform, NIS
None compatible conveyor systemsTrilogiq, Fastube
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishShiny
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentGalvanize
Manufacturing techniquePressed and deburring
1- Make sure you have the following parts:
1 R40-MS
1 F-A85/8
1 28mm pipes of your choice
1 R40-RT96 Conveyor
1 Drill
2- Take the R40-RT96 conveyor and insert it inside the R40-MS.
3-Hang the R40-MS on the P1 pipe.
4- Take a F-A85/8 screw and fix it in the corresponding opening.