Please select a shopping list
SKU
R40-TC

Track connector

Track connector steel zinc
USD$1.90
In stock
Only 669 left
The R40-TC is a metal conveyor connector to make track extensions. You can use this part to extend an 8-foot track up to 16 feet if you need to. We don't recommend that you use this product multiple times to connect more than two rails. If you require creating giant flow racks, we recommend that you check the R40-TU product instead. However, we don't recommend the construction of giant flow racks and instead advocate the creation of multiple smaller flow racks. If your structure is less than 16 feet long and you need to create a continuous track, this is the right connector.

The R40-TC is easy to install. Just slide the connector onto the bottom of the two rails and secure them with screws in the side holes of the R40-TC. Its shape will firmly fix the three pieces together. This item is relatively small, so you don't need to plan it into your design. This product is a galvanized conveyor connector. It was made to fit our conveyor perfectly.
More Information
Best SellerNo
Units per box40
Height inches1 5/8 in (41mm)
Width inches1 5/8 in (41mm)
Depth inches4 3/4 in (120mm)
Unit weight pounds0.341 lbs (0.155 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
Compatible conveyor systemsFlexpipe, Creform, NIS
None compatible conveyor systemsTrilogiq, Fastube
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishShiny
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentGalvanize
Manufacturing techniquePressed and deburring
1- Make sure you have the following parts:
1 R40-TC
2 R40-RT96
2- Take the R40-TC and insert it half way into the first R40-RT96 .
3- Take the second R40-RT96 and push it on to the empty half of the R40-TC.