Please select a shopping list
SKU
HJ-MS

Pipe mount start

Pipe mount start steel zinc
USD$1.65
In stock
Only 2496 left
The HJ-MS is a metal single connector used to create sliding pipes. This accessory works best with the HJ-DS, and together they make it possible to create angled pipes that let you slide all sorts of bins, boxes, and surfaces. When building a sliding pipe, this part is usually positioned at the beginning of the slope or at the highest point of the slope. The sliding pipe is a technique frequently used if you don't want to use conveyors or if you want to build a particular type of extension for a conveyor track.

The HJ-MS is also used to make the movable hook. Used with an HJ-12, you can assemble a moving arm with a hook at the end. This accessory can be secured quickly with two F-A85/8 screws.

The HJ-MS is so named because it was previously considered an all-in-one black joint set. Since it was named, the HJ-MS has become more of an accessory, and we have changed its black coating to the antistatic nickel-plated treatment. So now you can use this connector to make sliding pipes on ESD structures.
More Information
Best SellerNo
Units per box72
Height inches1 1/4 in (32mm)
Width inches3 1/4 in (83mm)
Depth inches1 5/16 in (33mm)
Unit weight pounds0.282 lbs (0.128 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RoHS certificationYes
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
Frequency of useVery high
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
1- Make sure you have the following parts:
1 HJ-MS
2 F-A85/8
2 28mm pipes of your choice
1 Drill
2- Take the P1 pipe and insert it inside the HJ-MS
3-Hang the HJ-MS on the P2 pipe.
4. Take two F-A85/8 and fix them in the corresponding openings.