Please select a shopping list

Corner joint set

Corner joint set steel cr

In stock

The HJ-2NP is a metal anti-static connector set that lets you create a three-pipe intersection or corner. This connector is quick to assemble with an inner and outer part. The connector is the second most used joint system after the HJ-1.

To create an HJ-2NP, you need to combine one H-2NP and one H-3NP with two M6-25BWZ bolts and two M6-NWZ nuts. Because this connector is used very frequently, you should keep the parts necessary to make an HJ-2NP nearby. This joint will probably be used for most of your structure’s external corners. The HJ-2NP is also the connector of choice when making structural separations on two perpendicular sides. Other applications of the HJ-2NP include the creation of more complex and ergonomic handles, the creation of V shape racking support or a V-shape roof, and it is often association with the AI-CORNER accessory when positioning a surface on external sides.

This connector can be installed easily with the possibility of connecting the H-3NP on a pipe without any other parts. This will help you finish the installation of the HJ-2NP with ease. The HJ-2NP features ten grabbing striations and eight screw holes, making it one of the strongest connectors and a favorite for heavy-duty structures.

The HJ-2NP is compatible with most 28mm pipe and joint systems. This will give you the freedom to use inner or outer parts of other systems with the HJ-2NP parts and complete with Flexpipe parts.
More Information
Best SellerNo
Units per boxNA
Needed parts1 (H2NP) + 1 (H3NP) + 2 (M6-25BWZ) + 2 (M6NWZ)
External height inches3 1/4 in (83mm)
External width inches3 1/4 in (83mm)
External depth inches1 5/16 in (33mm)
Unit weight pounds0.510 lbs (0.232 kg)
RoHS certificationYes
Frequency of useVery High
Reusable partsYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentNickel electroplating
Striations for grip10
Positioning guide8
Additional reinforcement hole3
1- Make sure you have the following parts:
1 H-2NP
1 H-3NP
2 M6-25BWZ
2 M6-NWZ
3 28mm pipes of your choice
1 Allen key or one drill equipped with an Allen Key 5mm tip
2- Take a connector H-3NP and fix it in the desired location on the P1 pipe.
3- Take a connector H-2NP and position it to form the inner corner of the HJ- 2.
4-Take two M6-25BWZ bolts and two M6-NWZ nuts and insert them into the corresponding openings. Make sure to put the bolts on the more accessible side.
5- Tighten the M6-25BWZ bolts and nuts M6-NWZ together a few threads , but no more.
6- Insert the P2 and P3 pipes within the HJ-2NP between the first and second guides as shown in the plan .
7- Tighten completely the M6-25BWZ bolts and M6-NWZ nuts together until the HJ-2NP attached firmly to the three pipes . A force of 9.8 Nm is recommended for this step.