Please select a shopping list
SKU
HJ-19

Parallel hinge joint set - DISCONTINUED

Paral. hinge joint set steel bk - DISCONTINUED
USD$2.23

In stock

DISCONTINUED

DISCONTINUED

Please, see our regular HJ-23 

More Information
Best SellerNo
Units per boxNA
Needed parts2 (H19) + 1 (AP-HINGE) + 1 (M6-25B) + 1 (M6-N)
External height inches1 7/8 in (48mm)
External width inches3 5/16 in (84mm)
External depth inches1 1/2 in (38mm)
Unit weight pounds0.319 lbs (0.145 kg)
RoHS certificationYes
RecyclableYes
Frequency of useVery low
Reusable partsYes
range of motion360°
Electric conductivity (ESD)No
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentBlack cathodic electrodeposition (Ecoating)
1- Make sure you have the following parts:
2 H-19
1 AP-HINGE
1 M6-25B
1 M6-N
2 28mm pipes of your choice
1 Allen key or one drill equipped with an Allen Key 5mm tip
2- Take two AP-Hinge and press them on the P1 and P2 pipes until the hinge are fix. 3- Take two connectors H-19 and group them around the both AP-HINGE.
4-Take a M6-25B bolt and a M6-N nut and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.
5- Tighten completely the M6-25B bolt and M6-N nut together until the HJ-19 attached firmly to hinge . A force of 9.8 Nm is recommended for this step.