Please select a shopping list
SKU
EW-3EF

3" Stem ESD Rigid Caster - DISCONTINUED

3'' anti-static rigid stem-mount caster - DISCONTINUED
USD$12.00

DISCONTINUED

DISCONTINUED

Please, see our regular EW-3ESB 

More Information
Best SellerNo
Units per box6
Unit weight pounds1.4 lbs (0.65 kg)
Box dimensions inchesL11 X W9 X H5 in (L280 X W235 X H130 mm)
Wheel diameter inches3 in (76 mm)
Total height inches4 1/16 in (104 mm)
Tread width inches1 1/4 in (32 mm)
RoHS certificationYes
RecyclableYes
ReusableYes
Recommend surfacesAsphalt, pavement, ceramic, carpet, flat steel, stone, wood, brick, linoleum, granit
Surfaces markingNone
NoiseNone
Electric conductivity (ESD)Oui
Corrosion resistanceGood
System operational temperature-22°F to 158°F (-30°C to 70°C)
Loading capacity150 lbs (68 Kg)
Bearing typePrecision ball bearing
Wheel materialThermoplastic Rubber (TPR)
Tread hardness70A
Wheel finishMatte
Brake typeNone
Wheel typeRigid
Radius3 in (76 mm)
Maximum speed2.5 M/h
Oil resistanceGood
  1. Ensure you have the following parts:
    • 1x EW-3EF
    • 1x WF-U5/16 U-bolt - included with the caster.
    • 2x WF-U5/16 nuts - included with the caster.
    • 1x WF-U5/16 metal plate - included with the caster.
    • 1x 28mm pipe of your choice
    • 1x Ratchet Wrench 3/4 in.
    • 1x Ratchet Wrench 5/16 in.
  2. Ensure that the structure is levelled when supported by the pipes that will be wheeled. Otherwise, the height difference might cause the structure to sway.
  3. Flip the structure for a better access to the bottom pipes.
  4. Unscrew the 3/4 in. bolt underneath the plate of the caster using the wrench.
  5. Tighten the nut located on the top of the stem for the rubber bushing to expend until it barely fits inside the pipe.
  6. Insert the wheel rod completely inside the pipe. Help yourself with a mallet if needed.
  7. Tighten the same 3/4 in. bolt using the wrench 3/4 and let the wheel rotate until it grips firmly inside the pipe.
  8. Place the WF-U5/16 metal plate between the pipe and the caster and aligned it with the corresponding openings.
  9. Insert the WF-U5/16 U-bolt in the openings in order to trap the tube inside the U-bolt.
  10. Tighten the WF-U5/16 nuts with the U-bolt using the wrench 5/16.