Please select a shopping list
SKU
HJ-12NP

Tee hinge joint set

Tee hinge joint set steel cr
USD$2.14

In stock

The HJ-12NP is a hinge anti-static connector that allows a pipe to rotate 360 degrees around another perpendicular pipe. This feature enables the creation of a multitude of rotating modules on Flexpipe structures. We use this hinge joint at Flexpipe to build doors, movable separations, and folding shelves. If you don't use a stopper on any rotating pipe, you can also slide the fitting onto this pipe and create different setups for separations. If you need to prevent sliding, be sure to take a look at the tips and tricks section of this product page.

This hinge will give you the option of adding additional working surfaces when necessary or even making entire folding structures like folding tables. To make an HJ-12NP, you need to assemble two H-12NP around an AP-HINGE with one M6-25BWZ bolt and one M6-NWZ nut.

Designing Flexpipe structures with the HJ-12NP can be tricky if you have not built a structure with a pipe and joint system before. We recommend that you visit our photo section to find ideas on how best to make use of this connector.
More Information
Best SellerNo
Units per boxNA
Needed parts2 (H12) + 1 (AI-HINGE) + 1 (M6-25B) + 1 (M6-N)
External height inches1 7/16 in (36mm)
External width inches3 5/16 in (84mm)
External depth inches1 1/2 in (38mm)
Unit weight pounds0.310 lbs (0.141 kg)
common usespivot, perpendicular tubes hinge
Compatible joint systemsFlexpipe, Creform
None compatible joint systemsTrilogiq, Fastube
RoHS certificationYes
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
Frequency of useLow
Reusable partsYes
range of motion360°
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
Corrosion resistance240 hours salt spray corrosion test
FinishGlossy
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentNickel electroplating
Manufacturing techniquePressed and deburring
Striations for grip4
1- Make sure you have the following parts:
2 H-12NP
1 AP-HINGE
1 M6-25BWZ
1 M6-NWZ
2 28mm pipes of your choice
1 Allen key or one drill equipped with an Allen key with a 5 mm tip
2- Take a AP-Hinge and press it on the pipe P1 until the hinge is fix.
3-Take two connectors H-12NP and group them around the AP-HINGE.
4-Take a M6-25BWZ bolt and a M6-NWZ nut and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.
5-Tighten the M6-25BWZ bolt and nut M6-NWZ together a few threads , but no more.
6- Insert the P2 pipe within the HJ-12NP between the first and second guides as shown in the plan .
7- Tighten completely the M6-25BWZ bolt and M6-NWZ nut together until the HJ- 12NP attached firmly to the AP-HINGE and the pipe P2 . A force of 9.8 Nm is recommended for this step.