Please select a shopping list
SKU
AP-CNNCT2

Pipe connector for stainless pipe

Pipe connector ss steel zinc
USD$1.60
Stocks
Farnham: 704
Los Angeles: 847
Lawrenceville: 732
  • Create structures longer than 96 inches
  • Fits inside EP-96-ST 28MM pipes (0.7MM thick)
  • 100 units per box (please order individually)

The AP-CNNCT2 is a metal coupling that allows you to join two pipes together.

Our standard pipes are 8 feet long. However, we also know some of you would like to build structures longer than 8 feet long. AP-CNNCT2 is the answer. The coupling is designed to provide a tight fit inside of the pipes making it very difficult to remove once inserted.

Select the AP-CNNCT if using the standard 28 mm pipes.

Assembly Tip: Due to the spacing created by the rib in the middle of this accessory, plan to add 1/8" (3.2mm) to the overall dimensions of your pipe length of structure. If you are using our Flexpipe Creator 3D software, this measurement will automatically adjust to the cut list when using this accessory.

Antistatic (ESD):
Compatible with EP-96-ST (ESD pipes)

Installation Steps:
See the installation steps tab to view how to assemble the AP-CNNCT2

Want to reuse parts of your old system?
The AP-CNNCT2 is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

More Information
Box Quantity100
Length3 9/16 in (90 mm)
Height7/8 in (22 mm)
Width7/8 in (22 mm)
Weight (kg/lbs)0.114 lb (0.052 kg)
Box DimensionsCardboard box of 11 X 9 X 5 in (279 mm X 229 mm X 127 mm)
Compatible brandFlexpipe, Creform, Fastube
Non Compatible BrandTrilogiq
Primary MaterialGalvanised Hot rolled steel (SPHC)
Temperature Resistance-58°F to 185°F (-50°C to 85°C)
Electric Conductivity (ESD)Yes
Manufacturing TechniqueFolded and welded
"1- Make sure you have the following parts:
1 AP-CNNCT2
2 28mm pipes of your choice
1 Mallet
2- Take the AP-CNNCT2 and slightly insert it inside the P1 pipe
3-Push completly the AP-CNNCT2 inside the P1 pipe with the help of a mallet.
4-Connect the P2 pipe on the remaining side of the AP-CNNCT2.

You need to enter info before adding a new review.

Write Your Own Review
You're reviewing:Pipe connector for stainless pipe