Please select a shopping list
SKU
HJ-90NP

Round angle joint set

Round joint set steel cr
USD$2.58

In stock

The HJ-90NP is a metal anti-static joint used to connect two perpendicular pipes and create a 90-degree rounded corner. This connector is almost always used to build all sorts of ergonomic handles. You could easily create handles with other connectors from the Flexpipe system. This one, however, is designed specifically to do so. Its shape gives your handles a natural curve and a comfortable feeling.

The use of HJ-90NP is so unique that when using it, users will automatically recognize that this part of the structure is a handle and that he or she should pull or push it. When combined with the rotating capacity of our hinge joints, this connector can create a rotating handle to facilitate the turning motion of a Flexpipe structure. The HJ-90NP is equipped with eight striations for grip and four screw holes for when you need to build a handle that can pull large and heavy carts.

To create an HJ-90NP, you need to combine two H-90NP with two M6-25BWZ bolts and two M6-NWZ nuts.
More Information
Best SellerNo
Units per boxNA
Needed parts2(H90NP) + 2 (M6-25BWZ) + 2 (M6NWZ)
External height inches2 3/16 in (55mm)
External width inches2 3/16 in (55mm)
External depth inches1 5/16 in (33mm)
Unit weight pounds0.488 lbs (0.222 kg)
common usesHandle corner
Compatible joint systemsFlexpipe, Creform
None compatible joint systemsTrilogiq
RoHS certificationYes
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq, Fastube
Frequency of useHigh
Reusable partsYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
Corrosion resistance240 hours salt spray corrosion test
FinishGlossy
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentNickel electroplating
Manufacturing techniquePressed and deburring
Striations for grip8
Additional reinforcement hole4
1- Make sure you have the following parts: 2 H-90NP 2 M6-25BWZ 2 M6-NWZ 2 28mm pipes of your choice 1 Allen key or one drill equipped with an Allen Key 5mm tip

2- Take two connectors H-90NP and group them around the pipes P1 and P2.

3-Take two M6-25BWZ bolts and two M6-NWZ nuts and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.

4- Tighten completely the M6-25BWZ bolts and M6-NWZ nuts together until the H-90NP attached firmly to both pipes . A force of 9.8 Nm is recommended for this step.