HJ-19NP is discontinued for April 1st, 2019. Please use HJ-23NP.
The HJ-19NP is a double hinge anti-static joint that makes two parallel pipes around each other. This connector is mostly used to build folding tables, doors, and other movable modules with an almost full 360-degree radius. This range can be reduced quickly by obstructive pipes. Be sure to plan your design to take advantage of the full radius capacity or to enable just a specific range of the hinges.
Even if the HJ-19NP allows you to build similar modules to the ones using theHJ-12NP, the circumstances of application for the two is not the same. The fact that one allows the rotation of parallel pipes and the other of perpendicular pipes makes them useful in very different setups. Like the HJ-12NP, this joint will slide on the two pipes if you don't immobilize them. Sliding the H-19NP is sometimes a good thing but may not always be what you want. We recommend that you check the tips and tricks section of this product page to learn how to immobilize the connector and when to do so.
To assemble an HJ-19NP, you need to assemble two H-19NP around two AP-HINGE with one M6-25BWZ bolt and one M6-NWZ nut.
|Units per box||NA|
|Needed parts||2 (H19) + 1 (AP-HINGE) + 1 (M6-25B) + 1 (M6-N)|
|External height inches||1 7/8 in (48mm)|
|External width inches||3 5/16 in (84mm)|
|External depth inches||1 1/2 in (38mm)|
|Unit weight pounds||0.319 lbs (0.145 kg)|
|Frequency of use||Very low|
|range of motion||360°|
|Electric conductivity (ESD)||Yes|
|Material||Hot rolled steel (SPHC)|
|Steel hardness (HRB)||0.65|
|System operational temperature||-40°F à 122°F (-40°C à 50°C)|
|Steel treatment||Nickel electroplating|
|Striations for grip||8|
|Additional reinforcement hole||4|
2 28mm pipes of your choice
1 Allen key or one drill equipped with an Allen Key 5mm tip
2- Take two AP-Hinge and press them on the P1 and P2 pipes until the hinge are fix. 3- Take two connectors H-19NP and group them around the both AP-HINGE.
4-Take a M6-25BWZ bolt and a M6-NWZ nut and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.
5- Tighten completely the M6-25BWZ bolt and M6-NWZ nut together until the HJ-19NP attached firmly to hinge . A force of 9.8 Nm is recommended for this step.
Need more informations ?
Here's everything you need to know!