45⁰ fix angle joint set

45 fix angle joint set steel bk

USD$1.53

In stock

Skip to the beginning of the images gallery

Description

The HJ-17 is an angled metal connector used to reinforce two perpendicular pipes. Unlike the HJ-6, HJ-6A, and HJ-14, this joint has a permanent 45-degree angle. This characteristic makes it particularly useful for individual reinforcement situations. If you have two perpendicular pipes and need to strengthen them, this joint is the best solution if you can afford to connect those pipes with a 45-degree pipe, which is not always the case.

Unlike the other angle connectors, this metal joint is only composed of two parts instead of four or six, which also makes it twice as fast to assemble. That structural characteristic makes it much stronger than the other solutions and increases the overall structural capacity of your Flexpipe structure. To make an HJ-17, you need to connect an H-17 and an H-18 with one M6-12B bolt and one M6-N nut.

The main application of the HJ-17 is to create a brace that enhances the structural capacity of the structures. However, you can also use this joint to create a strong 45-degree peg.

Technical Information

More Information
Best Seller	No
Units per box	NA
Needed parts	1 (H17) + 1 (H18) + 1 (M6-25B) + 1 (M6-N)
External height inches	2 1/8 in (54mm)
External width inches	3 1/4 in (82mm)
External depth inches	1 5/16 in (33mm)
Unit weight pounds	0.323 lbs (0.147 kg)
RoHS certification	Yes
Recyclable	Yes
Frequency of use	Moderate
Reusable parts	Yes
Electric conductivity (ESD)	No
Material	Hot rolled steel (SPHC)
Steel hardness (HRB)	0.65
Finish	Glossy
UV resistance	High
System operational temperature	-40°F à 122°F (-40°C à 50°C)
Steel treatment	Black cathodic electrodeposition (Ecoating)
Striations for grip	8

Installation Steps

1- Make sure you have the following parts:
1 H-17
1 H-18
1 M6-25B
1 M6-N
2 28mm pipes of your choice
1 Allen key or one drill equipped with an Allen Key 5mm tip
2-Take a connector H-17 and a connector H-18 and group them around the P1 pipe. 3-Take a M6-25B bolt and a M6-N nut and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.
4. Tighten the M6-25B bolt and nut M6-N together a few threads , but no more.
5- Insert the P2 pipe within the HJ-17 between the first and second guides as shown in the plan .
6. Tighten completely the M6-25B bolt and M6-N nut together until the HJ-17 attached firmly to the two pipes . A force of 9.8 Nm is recommended for this step.