Please select a shopping list
SKU
HJ-6A

Extended pivot joint set

Extend pivot joint set steel bk
USD$3.29

In stock

The HJ-6A is a metal connector set that you can assemble to create a two-pipe link with an adjustable angle. This joint lets you work with a wider angle range than the HJ-6. This large angle opens the door to many new applications, such as creating angled sides for entire structures, V-shaped racking systems with wider angles than 90 degrees, and creating bigger deportations for your fabrication panels or parts.

To make an HJ-6A, you need to group two H-6A and two H-6 together with three M6-25B bolts and three M6-N nuts. This joint has a 260-degree reach, giving you plenty of range to build the desired structure. This assembly is all about making the structural angled sides, V-roofs or V-racks you need without compromising with preset angles.

This connector can be installed easily if you follow our installation steps one by one. The HJ-6A is equipped with eight striations for better gripping.
More Information
Best SellerNo
Units per boxNA
Needed parts2 (H6A) + 2 (H6) + 3 (M6-25B) + 3 (M6-N)
External height inches5 7/16 in (138mm)
External width inches1 5/16 in (33mm)
External depth inches1 5/16 in (33mm)
Unit weight pounds0.609 lbs (0.277 kg)
RoHS certificationYes
RecyclableYes
Frequency of useVery low
Reusable partsYes
range of motion260°
Electric conductivity (ESD)No
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentBlack cathodic electrodeposition (Ecoating)
Striations for grip8
1- Make sure you have the following parts:
2 H-6
2 H-6A
2 M6-25B
2 M6-N
2 28mm pipes of your choice
1 Allen key or drill equipped with an Allen Key 5mm tip
2- Take a connector H-6 and install it in the desired location on the P1 pipe.
3-Take a M6-25B bolt and a M6-N nut and insert them into the corresponding openings , making sure to put the bolt on the most accessable side..
4 - Tighten completely the M6-25B bolt and M6-N nut together until the H-6 connectors attached firmly to the P1 pipe . A force of 9.8 Nm is recommended for this step.
5- Repeat step two with H-6A connectors and P2 pipe.
6-Reapeat step three with H-6A connectors.
7- Reapeat step four with H-6A connectors.
8- Align remaining holes of H-6 and H -6A connectors and adjust the angle of the pipes.
9-Take a M6-25B bolt and a M6-N nut and insert them into the remaining openings. Make sure to put the bolt on the more accessible side.
10- Tighten completely the M6-25B bolts and M6-N nuts together until the HJ-6A attached firmly to the P1 and P2 pipes . A force of 9.8 Nm is recommended for this step.