Please select a shopping list
SKU
HJ-6

Pivot tee joint set

Pivot tee joint set steel bk
USD$3.12

In stock

  • Adjustable angle from 0 degrees up to 180 degress
  • Compatible with 28 mm pipes
  • Nuts and bolts are included, but packaged separately
  • Assembly required

The HJ-6 is a black metal joint set that allows you to create a two-pipe intersection with an adjustable angle. This joint set is used in many applications to create an opening or bracing.

To assemble an HJ-6 you need to combine two H-5 and two H-6 together with two M6-25B bolts and two M6-N nuts.

Assembly tip:
This joint set will create a distance of an inch between the two pipes. This distance is used for supporting pannels or manufacturing parts. It is also possible to use the HJ-6 to create a door or a folding table hinge. Before considering the HJ-6, we suggest thinking of using other joint sets: HJ-12 or HJ-23

Technical Information:
This joint set is designed with 8 striations for a better grip on the plastic coating of the 28 mm pipes.

Installation Steps
See the installation steps tab to view how to assemble this connector.

Antistatic Version (ESD):
An electric conductivity version if offered if you wish to build antistatic structures: HJ-6NP

Want to reuse parts of your old system?
The HJ-6 Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.


Please note that nuts and bolts are included, but packaged separately. Assembly is required.

More Information
Frequency of UseModerate
Electric Conductivity (ESD)No
Manufacturing TechniqueStamping and deburring
  1. Ensure you have the following parts:
  2. Take the two H-6 connectors and group them around the first pipe.
  3. Fix the connectors by placing an M6-25B with an M6-N in the corresponding openings until it's firmly attached to the pipe.
  4. Group together with the two H-5 connectors around the second pipe and insert the first pipe with the attached H-6's. Loosely tighten with the remaining M6-25B and M6-N through both H-5 and H-6.
  5. Position into the desired angle and tighten completely until the HJ-6 joint set if firmly attached to the two pipes. 

You need to enter info before adding a new review.

Write Your Own Review
You're reviewing:Pivot tee joint set