Please select a shopping list
SKU
AI-CORNER

Corner bracket

Corner bracket steel zinc
USD$1.75
In stock
Only 1246 left
The AI-CORNER is a truly unique accessory from the Flexpipe system. This metal corner part is used to create embedded surfaces for carts, workstations, and boards. You will need at least four of them to connect the surface to the project. This part is extremely practical when you don't want items to slide easily or to fall off your working area.

The AI-CORNER will enable you to create an embedded space of 3/4 to 1/4 inch depth. This will give you an entirely different look than using multiple AO-EMT1. This item makes pipes stand out and accentuates the definition of the borders. We use this technique to define the board's contour and provides a frame effect with the pipes.

You can install multiple AI-CORNERs to one intersection depending on the intersection's configuration. Install various corners in V, C, X or square shapes to create the setup you like. This is useful for colossal areas that could be separated into many smaller work areas to give the structures strength.
More Information
Best SellerNo
Units per box60
Height inches15/16 in (24mm)
Width inches4 5/8 in (117mm)
Depth inches4 5/8 in (117mm)
Unit weight pounds0.158 lbs (0.072 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
1- Make sure you have the following parts:
4 AI-CORNER
8 F-A85/8
4 F-C61
1 Surface of your choice
2 28mm pipes forming four corners
1 Drill
2- Take an AI-CORNER and install it as seen on the plan.
3- Fix the AI-CORNER to the P1 and P2 pipes with the help of two F-A85/8 screws.
4- Repeat steps 2 and 3 for the other corresponding corners.
5- Put down the S1 surface on the four AI-CORNER
6- Fix the S1 surface to the four AI-CORNER with the help of four F-C61 screws.