Please select a shopping list
SKU
AF-ILEV

Adjustable inner foot

Adjust. inner foot steel zinc
USD$2.25
In stock
Only 382 left
The AF-ILEV is an adjustable metal foot for the Flexpipe system. This part is ideal for structures that will be placed on uneven floors. This accessory can be adjusted up to 3 15/16 inches. This foot is installed inside the pipe and is compatible with all pipes except the EP-96-ST stainless steel pipe and the 2mm thick pipe. Be sure to check the AF-OLEV if you want to use adjustable feet for those exceptions.

The use of the AF-ILEV will never impact the stability of your structure and will help to even surfaces, reducing any frustrating sloping. The bottom of the AF-ILEV is cut to let you push a structure up against a wall or another structure without losing space doing so. You can always fix the bottom of the feet to the floor to create a floor anchor and provide more stability to the structure.

The AF-ILEV is used mainly in the creation of flowracks and workstations. This foot should be avoided on soft surfaces, where it should be replaced by the AP-ICAP or AF-RUB.
More Information
Best SellerYes
Units per box100
Height inches4 3/4 in (120mm)
Width inches1 3/4 in (45mm)
Depth inches2 in (51mm)
Unit weight pounds0.321 lbs (0.146 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableNo
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
1- Make sure you have the following parts:
1 AF-ILEV
1 28mm pipes of your choice
1 Mallet
2- Take the AF-ILEV bushing and insert it completly in the P1 pipe with the help of a mallet.
3- Take the AF-ILEV and screw it in the bushing at the desired height .