White HDPE plastic 1/2''

Name: White HDPE plastic 1/2''
SKU: D-HDPEW-481/2
Price: 248.00 USD
Availability: InStock

White HDPE plastic 4X8X1/2''

Be the first to review this product

USD$248.00

Stocks

Farnham: 205

Los Angeles: 54

Lawrenceville: 84

High-density polyethylene (HDPE) is excellent for creating work surfaces and drawers
Weather, corrosion, and impact resistant
Use it to create tool identification silhouette displays

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

D-HDPEW-481/2

- HDPE is a glossy, rigid material, the high density of this product makes it shatterproof. Typically cut using a table saw or a portable saw.

- Use it to create work surfaces, containers, and drawers for any flexpipe structure.

- We recommend the thinner version D-HDPEW-481/4 to keep from adding too much weight to your structures, such as for panels where the thickness of the 1/2" may not be necessary.

EASY TO INSTALL

- HDPE can be installed by securing it from the top, through the pipe with a decking screw (F-SF81), or from the bottom with the use of an AO-EMT1or AO-EMT2 and the F-S81/2 screw.

- Check out the INSTALLATION STEPS to learn how.

Contact your regional sales manager for volume pricing.

Technical Information

More Information
Length	96 in (2438.4 mm)
Height	1/2 in (13 mm)
Width	48 in (1219 mm)
Weight (kg/lbs)	80 lb (36.364 kg)
Common Usage	Work surfaces, containers and drawers
Primary Material	High Density Polyethylene
Temperature Resistance	-58°F to 185°F (-50°C to 85°C)
Electric Conductivity (ESD)	No

Installation Steps

When installing 1/2" HDPE there are two common ways to install:

1. From the top

- Put the AO-SHIM on the pipe (one every 12 inches for HDPE 1/2)

- Put the surface on the pipe and lock it into place

- Starting from a corner pierce 1/8 hole trough surface and AO-SHIM every 2 AO-SHIM

- Countersink the holes

- Fasten the screw through the surface and the AO-SHIM until the head is flat with the decking

2. From the bottom

- Using an AO-EMT1

- Using an AO-CLIP

You need to enter info before adding a new review.

Order Id

Order Email

Write Your Own Review

Tips from the expert

Save money when making structures with working surfaces, buy the D-HDPEW-481/4 which is thinner and less expensive than its counterpart and fix it on half-inch-inch plywood with some countersunk screws. Although less esthetic, it could save you a good amount of money.
Tips by Sylvain Lejour - Chief Sales Officer