Please select a wishlist


Divider plastic black
In stock
Only 234 left
The AS-DIVIDER is a two-part plastic accessory used to create a division. This item is ideal when you need to create a separation between odd shapes on racks and carts. This is frequently the case with curved parts.

The AS-DIVIDER comes with a bolt and a nut. The divider will act as a stopper, but you can move it up and down the length of the pipe by hand if you apply enough pressure. This gives you the freedom to redefine the configuration of the separations instantly.

This accessory can also serve as a guide for movable pipe arms. Unlike the AS-REST, the AS-DIVIDER is easily movable once installed.
More Information
Best SellerNo
Units per box200
Height inches3 9/16 po (91mm)
Width inches1 3/8 po (35mm)
Depth inches3/8 po (10mm)
Unit weight pounds0.020 lbs (0.009 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
Electric conductivity (ESD)No
MaterialPolyethylene (PE)
System operational temperature-58°F à 185°F (-50°C à 85°C)
Manufacturing techniqueinjection molding
1- Make sure you have the following parts:
1 28mm pipes of your choice
1 Screwdriver
2- Take the two parts of the AS-DIVIDER and group them around the P1 pipe.
3-Take the bolt and the nut that come with the AS-DIVIDER and insert them into the corresponding openings.
4- Tighten completely the bolt and nut together until the AS-DIVIDER attached firmly to the pipe.