The AP-ICAP is a rubber cap made to fit perfectly inside the 28mm pipes we use at Flexpipe. Designed to be press-fitted into the tube ultimately creating a tight seal.
This accesory is imperative when you want to improve safety by preventing cuts. It adds longevity to your structures by reducing potential water infiltration thus preserving the interior of the pipe from corrosion and overall dust-free tubes by sealing the openings of the pipes. It can also be used as an anti-scratch cap to eliminate damaging any fragile flooring by a metal foot or an exposed pipe end.
Compatible with ESD pipes.
See the installation steps tab to view how to assemble the AP-ICAP.
Want to reuse parts of your old system?
The AP-ICAP is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
All AP-ICAP are sold individually.
To make it easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system considers single amount only. Please enter the total amount of caps you wish to receive (example; 400 units = 1 box).
|Units per box||400|
|Height inches||11/16 in (17mm)|
|Width inches||1 1/16 in (27mm)|
|Depth inches||1 1/16 in (27mm)|
|Unit weight pounds||0.007 lbs (0.003 kg)|
|Box dimensions inches||11 X 9 X 5 in (279mm X 229mm X 127mm)|
|Compatible pipe systems||Flexpipe, Creform, Fastube|
|None compatible pipe systems||Trilogiq|
|Electric conductivity (ESD)||Non|
|Material||Thermoplastic Rubber (TPR)|
|System operational temperature||-58°F à 185°F (-50°C à 85°C)|
|Manufacturing technique||injection molding|
1- Make sure you have the following parts:
1 28mm pipes of your choice
2- Take the AP-ICAP and slightly insert it inside the P1 pipe
3-Push completly the AP-ICAP inside the P1 pipe with the help of a mallet.
Need more informations ?
Here's everything you need to know!