Please select a shopping list

Pipe connector for stainless pipe

Pipe connector ss steel zinc
In stock
Only 1238 left
The AP-CNNCT2 is a metal extension that allows you to connect two stainless steel pipes together. Flexpipe offers steel pipes 8 feet long because they are easier, faster, and cheaper to move and ship, but we also know that some of you want to build bigger structures and that 8-foot pipes are not long enough. The AP-CNNCT2 and the AP-CNNCT are the solutions to that problem.

The extension is designed to provide a tight press fit effect. It is very hard to remove the AP-CNNCT2 once it is inserted in the pipes. When installed, the extension looks aesthetically pleasing and will never impact movement nor inhibit structural integrity.

The AP-CNNCT2 is not just about building bigger structures. The metal accessories are also a good way to optimize the use of pipes. The connector lets you reuse your old pipes, which would otherwise be sent to the recycling. This technique could be economical if you manage your Flexpipe inventory well and reuse every Flexpipe part possible.

Select the AP-CNNCT if you are using 28mm standard pipes. This version will not work with the stainless steel pipes, but will fit the inside diameter of the other pipes.
Assembly Tip: Due to the spacing created by the ring of this accessory, plan to add 1/8" (3.2mm) to the overall dimensions of your length pipe on your structure. If you use our Flexpipe Creator 3D software, this measurement automatically adjusts to your cut list when you add this accessory.
More Information
Best SellerNo
Units per box100
Height inches7/8 in (22mm)
Width inches7/8 in (22mm)
Depth inches3 9/16 in (90mm)
Unit weight pounds0.114 lbs (0.052 kg)
Box dimensions inches11 X 9 X 5 po (279mm X 229mm X 127mm)
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogic
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)65%
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
"1- Make sure you have the following parts:
2 28mm pipes of your choice
1 Mallet
2- Take the AP-CNNCT2 and slightly insert it inside the P1 pipe
3-Push completly the AP-CNNCT2 inside the P1 pipe with the help of a mallet.
4-Connect the P2 pipe on the remaining side of the AP-CNNCT2.