Please select a shopping list
SKU
AI-CENTER

Embed pipe support

Embed pipe steel zinc
USD$1.75
In stock
Only 1652 left
The AI-CENTER is a metal anchor joint that improves the supporting capacity of a surface. We use this product with the AI-CORNER as an alternative or a complement to the AI-SUPPORT to create more contact points with an embedded working surface. Doing this will generally make for stronger structures. The AI-CENTER's role is to be a perfect anchor for large surfaces that would have the tendency to bend under its weight.

The AI-CENTER is a stronger solution than the AI-SUPPORT. However, it is more expensive and it takes up more space than its smaller counterpart. This product is the ideal solution when you are going to place a heavy load on an embedded working surface. If you need an in-between solution, you can use a mix of these two products to create the right support needed while staying in your budget. We recommend that you check the design section to see how we calculate our support needs when making a Flexpipe structure.

Unlike the HJ-MS and HJ-DS, the AI-CENTER is not designed to hold containers like boxes and bins because of its upper, rounded part. This product is built to support surfaces. This product is galvanized and can be used for antistatic purposes.
More Information
Best SellerNo
Units per box60
Height inches2 1/16 po (52mm)
Width inches3 1/4 po (59mm)
Depth inches1 3/16 po (30mm)
Unit weight pounds0.290 lbs (0.132 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
1- Make sure you have the following parts:
1 AI-CENTER
2 F-A85/8
2 28mm pipes of your choice
1 Drill
2- Take the P1 pipe and insert it inside the AI-CENTER.
3-Hang the AI-CENTER on the P2 pipe.
4. Take two F-A85/8 and fix them in the corresponding openings.