Bolt for joint sets

Name: Bolt for joint sets
SKU: M6-25B
Price: 0.12 CAD
Availability: InStock

Bolt for joint set black zinc

Be the first to review this product

CDN$0.12

Stocks

Farnham: 181882

Los Angeles: 112617

Lawrenceville: 255854

Used to assemble 99% of all Flexpipe joints
High corrosion resistance
1800 units per box (please order individually)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The M6-25B is a black coated metal bolt that is used to assemble 17 of the 18 different connectors in the Flexpipe system. This bolt and the M6-N nut are the foundation of every Flexpipe structure.

We highly recommend that you keep a box or two of M6-25B at all times, since you will use a lot of them for all your structures.

The M6-25B bolt was designed to assemble Flexpipe HJ joints, and it was created to do only that. We don't recommend that you use this part with the M6-N nut to connect anything other than the Flexpipe system.

Installation Steps:
See the installation steps tab to view how to assemble this bolt.

Technical Information:
This bolt is fixed to the M-6N using a 5mm T-HANDLE allen wrench.
(It is essential that the bolt is tightened between 12-14 N.m torque)

Antistatic Version (ESD):
Be sure to select the antistatic version M6-25BWZ for all the ESD connectors. This version is nickel-plated to provide the same ESD characteristics as the Nickel Plated joints.

Want to reuse parts of your old system?
The M6-25B Flexpipe is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

Technical Information

More Information
Box Quantity	1800
Weight	0.015 lb (0.007 kg)
Box Dimensions	Cardboard box of 11 X 9 X 5 in (279 mm X 229 mm X 127 mm)
Common Usage	Used to assemble 99% of all Flexpipe joints
Compatible brand	Flexpipe, Creform, Fastube
Non Compatible Brand	Trilogiq
Primary Material	SCM440 with black cathodic electrodeposition (Ecoating)
Temperature Resistance	-40°F to 572°F (-40°C to 300°C)
Frequency of Use	Very high
Electric Conductivity (ESD)	Yes

Installation Steps

Ensure you have the following parts:
- 1x Joint set of your choice
- (1-4)x M6-25B bolts (depending on Joint set)
- (1-4)x M6-N nuts (depending on Joint set)
- (2-5)x 28mm pipes of your choice (depending on Joint set)
- 1x T-HANDLE 5mm hex key
Group connectors around corresponding pipes.
Make sure to put the bolt on the most accessible side and insert the smaller diameter of the nut into the corresponding hole.
Loosely tighten all M6-25B bolts and M6-N nuts by putting them in the corresponding openings of the particular joint set.(Press the nut into the connector using your finger tip and turn the bolt into the nut with other hand).
Fully insert all pipes
Tighten completely the M6-25B and the M6-N together until the Joint set is firmly attached to the pipes. A force between 12-14 Nm is recommended for this step.