Please select a shopping list
SKU
HJ-90NP

Round angle joint set

Round joint set steel cr
CDN$2.80

In stock

  • Compatible with 28 mm pipes
  • Assembly required
  • Joint set with antistatic properties (ESD)

The HJ-90NP is a chrome-plated joint set with antistatic properties (ESD) that allows connecting two 28 mm pipes to create a 90-degree corner. This joint set is often used for ergonomic cart handles.

To assemble an HJ-90NP you need to put two H-90NP together with two M6-25BWZ bolts and two M6-NWZ nuts.

Technical Information:
This joint set is designed with 8 striations for a better grip on the plastic coating of the 28 mm pipes. It also includes 4 additional pre-drilled reinforcement holes to ensure extra strength to your structure. By adding a self-drilling screw F-A85/8, you will solidify the connector joints positioned on a corner where there is a higher risk of impact.

Installation Steps:
See the installation steps tab to view how to assemble this connector.

Non-Electric Conductivity Version:
A version of this joint set is offered without antistatic properties: HJ-90

Want to reuse parts of your old system?
The HJ-90NP Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.

More Information
Best SellerNo
Units per boxNA
Needed parts2x H-90NP + 2x M6-25BWZ + 2x M6-NWZ
Length inches3 1/8 in (79 mm)
Width inches1 5/16 in (33 mm)
External height inches2 3/16 in (55mm)
External width inches2 3/16 in (55mm)
External depth inches1 5/16 in (33mm)
Steel thickness inches1/8 in (2.5 mm)
Unit weight pounds0.488 lbs (0.222 kg)
common usesHandle corner
Compatible joint systemsCreform, NIS, C Tek Lean Solutions, Trilogiq (28 mm)
None compatible joint systemsFastube, Trilogiq (28.6 mm)
RoHS certificationYes
RecyclableYes
Compatible pipe systemsCreform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm)
None compatible pipe systemsTrilogiq (28.6 mm)
Frequency of useHigh
ReusableYes
Reusable partsYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)68-75 HRB
Corrosion resistance240 hours salt spray corrosion test
FinishShiny
UV resistanceHigh
System operational temperature-148°F to 572°F (-100°C to 300°C)
Steel treatmentChrome plating
Manufacturing techniqueStamping and deburring
Striations for grip8 striation grip lines
Positioning guide4 positioning guide lines
Additional reinforcement hole4 reinforcement holes
  1. Ensure you have the following parts:
    • 2x H-90NP
    • 2x M6-25BWZ bolts
    • 2x M6-NWZ nuts
    • 2x 28mm pipes of your choice
    • 1x T-HANDLE 5mm hex key
  2. Group the two H-90NP connectors around the first and the second pipe, between the first and the second positionning guidelines.
  3. Fix the connectors together by placing the M6-25BWZ bolts with the M6-NWZ nuts in the corresponding openings. Make sure to place the bolts on the most accessible side.
  4. Tighten completely until the HJ-90NP joint set is firmly attached to the two pipes. A force between 12-14 Nm is recommended for this step.