The HJ-9 is a black metal joint set that allows you to fix your structure to a surface. This connector is frequently used with workstations, but also to fix structures on the floor, on the wall or on the ceiling.
This joint set has the benefit of allowing you to use a component of another system than Flexpipe. In this way, you can create hybrid structures such as workstations with aluminum or wooden shelves, for example. This anchorage can also be used as safety support under a surface. Psst! You might be interested in the HJ-8 joint set as well.
See the installation steps tab to view how to assemble this connector.
Antistatic Version (ESD):
An electric conductivity version if offered if you wish to build antistatic structures: HJ-9NP
Want to reuse parts of your old system?
The HJ-9 Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
|Units per box||NA|
|Needed parts||2x H-9 + 1x M6-25B + 1x M6-N|
|Length inches||2 3/16 in (56 mm)|
|Width inches||1 5/16 in (33 mm)|
|External height inches||2 1/4 in (57mm)|
|External width inches||2 13/16 in (71mm)|
|External depth inches||1 5/16 in (33mm)|
|Steel thickness inches||1/8 in (2.5 mm)|
|Unit weight pounds||0.293 lbs (0.133 kg)|
|Compatible joint systems||Creform, NIS, C Tek Lean Solutions, Trilogiq (28 mm)|
|None compatible joint systems||Fastube, Trilogiq (28.6 mm)|
|Compatible pipe systems||Creform, Fastube, Trilogiq (28 mm), NIS (28 mm), C Tek Lean Solutions (28 mm)|
|None compatible pipe systems||Trilogiq (28.6 mm)|
|Frequency of use||Moderate|
|Electric conductivity (ESD)||No|
|Material||Hot rolled steel (SPHC)|
|Steel hardness (HRB)||68-75 HRB|
|System operational temperature||-148°F to 572°F (-100°C to 300°C)|
|Steel treatment||Black cathodic electrodeposition (Ecoating)|
|Manufacturing technique||Stamping and deburring|
|Striations for grip||4 striation grip lines|
|Positioning guide||4 positioning guide lines|
|Additional reinforcement hole||None|
- Ensure you have the following parts:
- 2x H-9
- 1x M6-25B bolt
- 1x M6-N nut
- 1x 28mm pipe of your choice
- 1x T-HANDLE 5mm hex key
- Take the two H-9 connectors and group them around the pipe.
- Fix the connectors together by placing the M6-25B bolt with the M6-N nut in the corresponding openings and completely tighten until the HJ-9 joint set is firmly attached to the pipe. Make sure to place the bolts on the most accessible side. A force between 12-14 Nm is recommended for this step.
- Fix the HJ-9 on the surface of your choice with 4 F-SF81 or any appropriate screws for the desired surface.
See image below for assembly idea
Need more informations ?
Here's everything you need to know!